Trying to get 802.1x working on T1500G-10PS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Trying to get 802.1x working on T1500G-10PS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Trying to get 802.1x working on T1500G-10PS
Trying to get 802.1x working on T1500G-10PS
2019-06-11 20:04:01
Hardware Version: V1
Firmware Version: 1.0.0 Build 20170607 Rel.38008(s)

I've been pulling out what's left of my hair trying to get this switch to authenticate ports against a freeradius server. Looking at the server logs, it doesn't appear to be even trying to connect.

 

 

 

 

 

I can't find the screenshot of the port config at the moment, but have ports set to "enable", "MAC mode". All ports show "Authorized", but don't pass traffic. No request at the radius server.

 

Any thoughts?

 

  0      
  0      
#1
Options
2 Reply
Re:Trying to get 802.1x working on T1500G-10PS
2019-06-12 09:37:44

Hi cpbecket

 

Your confiruation seems has not problem. You can try to upgrade the firmware of T1500G-10PS V2. T1500G-10PS V1 can use the firmware of V2. But you need to re-configure the switch and do not suggest to downgrade to V1 firmware.

  1  
  1  
#2
Options
Re:Trying to get 802.1x working on T1500G-10PS
2019-09-23 14:22:55

@cpbecket Hi, were you successfull with it?

THX

  0  
  0  
#3
Options