Business Community > WiFi > Guest WiFi from an Access Point connected to a Switch
< WiFi

Guest WiFi from an Access Point connected to a Switch

Guest WiFi from an Access Point connected to a Switch

Guest WiFi from an Access Point connected to a Switch
Guest WiFi from an Access Point connected to a Switch
Friday - last edited Sunday

I need to create an isolated Guest WiFi but I am a little confused by my options.

Currently, I have EE Home Hub Router that provides WiFi and ethernet ports.  I have an TP Link SL1311MP unmanaged switch that is connected to the router by ethernet cable.  The SL1311MP then has 3 EA245 Access Points that provide WiFi to the perimeter of the property.

 

What I want to do is add a 4th Access Point to the SL1311MP to provide guest WiFi.  What I want to avoid is the guests having any access to the wireless and wired items on my home network.

 

Can I simply add another Access Point and configure it somehow?  Do I need new hardware?  Is it even possible?  What are my options?  Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Guest WiFi from an Access Point connected to a Switch-Solution
Sunday - last edited Sunday

Hi  @Little_Old_Me 

 

 

If you only want a guest network, the current device is sufficient. The EAP itself supports this feature, and there's no need to purchase an additional device. The EAP can simultaneously broadcast a guest network.

 

Below is the config guide:

How to configure guest network on Omada Controller

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Guest WiFi from an Access Point connected to a Switch
Friday

  @Little_Old_Me 

 

You can make any SSID on any TP-Link access point "guest mode" which isolates it from all other IPs on that lan.  It can only access itself and the internet.

 

Its generally pretty secure, but there isnt much more you can do without a router that supports VLANs and a managed switch you can apply some ACLs on.

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x1, ES205G x2, EAP650 x6 Remotes: ER605 v2 x3, SG2008P x2, EAP650 x2 VPN Server: ER7206 v2 Controller: OC300
  1  
  1  
#2
Options
Re:Guest WiFi from an Access Point connected to a Switch
Saturday

  @GRL Thank you for the reply.

 

If I understand correctly, to fully secure the local network I need a new router (the Home Hub does not support VLAN) and change the switch to a managed switch.

I can look through the the website and find a router that supports VLAN.   What do I need to look for in managed switch?  Will they all do what I need and what ACL's do I have to read up on?

 

Thanks again.

  0  
  0  
#3
Options
Re:Guest WiFi from an Access Point connected to a Switch-Solution
Sunday - last edited Sunday

Hi  @Little_Old_Me 

 

 

If you only want a guest network, the current device is sufficient. The EAP itself supports this feature, and there's no need to purchase an additional device. The EAP can simultaneously broadcast a guest network.

 

Below is the config guide:

How to configure guest network on Omada Controller

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 59

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.