NAT for SIP Access Point
Note, the question is about the EAP650-Desktop(EU) NOT about the EAP650, it does not exist as model in that forum..
Hello,
The Access Point EAP650-Desktop(EU) has a analogue RJ11 port in it, which I wanted to use for my T38 Fax device.. now the question is do I need to configure for the Access Point NAT Forwarding rules, that it can access the [Deutsche] Telekom servers? Since mine always says "state unknown" on the telephone number..
The reason why I'm asking is because I already have a SIP gateway running that is why I can't really test that. Maybe someone already had something similar.
Thanks for helping
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Julian2111
EAPs operate purely at Layer 2 and do not support NAT configuration. These settings should be implemented on your NAT-enabled device (typically your router).
- Copy Link
- Report Inappropriate Content
Hi @Julian2111
Do you mean configure port forwarding for the EAP on your router? You may have a try anyway.
In the port forwarding config, EAP IP is the client.
- Copy Link
- Report Inappropriate Content
Hi @Julian2111
EAPs operate purely at Layer 2 and do not support NAT configuration. These settings should be implemented on your NAT-enabled device (typically your router).
- Copy Link
- Report Inappropriate Content
Hi,
Sorry for my bad expression, I know that my question was more does the AP need port forwarding to get access to my providers SIP server?
- Copy Link
- Report Inappropriate Content
Hi @Julian2111
Do you mean configure port forwarding for the EAP on your router? You may have a try anyway.
In the port forwarding config, EAP IP is the client.
- Copy Link
- Report Inappropriate Content
Thank you very much that worked, I just wasn't sure does the SIP part somehow the controller or the router or the AP but it was the AP thanks
- Copy Link
- Report Inappropriate Content
Great to hear that the issue has been resolved! If you encounter any further problems or have additional questions, feel free to reach out. We're here to help! 😊
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 87
Replies: 5
Voters 0
No one has voted for it yet.