Hi @toomanynumbers 

Thanks for posting in our business forum.

1.1.5? Where do you get 706W on 1.1.5 firmware? I have no recollection of 1.1.5 anywhere and the official website does not list it either.

If you are not using a public firmware, you might contact the person who shared the firmware with you.

Hi @toomanynumbers 

Thanks for posting in our business forum.

toomanynumbers wrote

  @Clive_A Yes 1.1.5. It was offered as an update on the Devices page. I clicked Start Rolling Update and it updated all my devices on April 6th. Then after all devices were updated, I updated the controller.

 

 

 

Let me see what the dev replies to this. Will update you soon.

Hi @toomanynumbers 

Thanks for posting in our business forum.

toomanynumbers wrote

Problem

Wireless VLAN assignment does not work when client connects to ER706W. When the same client connects to one of the three EAP653 then VLAN assignment works as expected. WLAN is configured to VLAN 4 (guest VLAN) and captive portal. RADIUS MAC authentication is enabled with fallback to portal. RADIUS users are set to VLAN 3.

 

When a RADIUS user connects to a EAP653, they authenticate via MAC address and get placed into VLAN 3. When that same user connects to the ER706W, they authenticate correctly via MAC address (portal page not shown) but they still get placed into VLAN 4.

 

When a non-RADIUS user connects to either a EAP653 or the ER706W, they get shown the captive portal and get placed into VLAN 4.

 

Network

1x OC200 v1.0, fw1.34.2

1x ER706W v1.0, fw1.1.5

1x SG2218P v2.0, fw2.0.3

3x EAP653 v1.0, fw1.1.0

 

Config

 

 

 

 

 

 

Confirmed it is a problem, but we have not confirmed if it is a router or controller issue. The team is gonna confirm it and the related team will fix it.