Hello!  I created a VLAN 10 and assigned it to port 4.  I configured port 4 with IP Address 10.0.0.201.  The default LAN IP is 192.168.5.1. Both networks are setup with DHCP.  I configured my laptop with IP Address 10.0.0.109/24 and connected it to port 4 of the ER605.  From my laptop, I can ping 10.0.0.201 and I can ping 192.168.5.1, and some devices in the 192.168.5.0/24 network.  However, I cannot ping any device in the network connected via IPSec site-to-site VPN!  Is there something else I need to configure in the local and remote ER605's to be able to access remote devices of the remote ER605 connected via IPSec site-to-site VPN?  Thanks in advance.

Local ER605:

Default  LAN: 192.168.5.0/24 with IP Address 192.168.5.1

VLAN10: 10.0.0.0/24 with IP Address 10.0.0.201

Remote ER605:

Default LAN: 192.168.4.0/24 with IP Address 192.168.4.1

Both ER605's are connected via IPSec site-to-site VPN and this connection is solid.  I can access all devices on the remote site IF I'm connected to the 192.168.5.0/24 network but NOT if I'm connected to 10.0.0.0/24 network!