EAP 670 degraded speed at 100Mbps

EAP 670 degraded speed at 100Mbps

EAP 670 degraded speed at 100Mbps
EAP 670 degraded speed at 100Mbps
18 hours ago
Tags: #speed issue
Model: EAP670  
Hardware Version: V1
Firmware Version: 1.1.0

Hi,

We are experiencing the same issue with downgraded speeds AP TP-EAP 670. When we installed the device a year ago, we achieved over 600 Mbps on new computers. However, we recently noticed a speed reduction to 92 Mbps while connected to a TP-Link JetStream Managed Switch (TLSG3452P) with PoE+.

Initially, we suspected a firmware-related issue and upgraded from version 1.0 to 1.1.0, but the problem persists. The switch still shows a 1000 Mbps negotiation.

Any insights or recommendations would be appreciated.

Thank you,
Feras

  0      
  0      
#1
Options
2 Reply
Re:EAP 670 degraded speed at 100Mbps
18 hours ago

  @IT_Team_HT 

 

Trying to run WiFi Optmization to confirm a clear channel?

 

Confirm the clients have decent signal?  enable signal column in the client list and check.  Anything above -73 is the start of low signal. 

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:EAP 670 degraded speed at 100Mbps
13 hours ago

Hi @IT_Team_HT,

 

Try to confirm that the issue related to the wifi or wired network segment by testing each segment independently.  You can run iperf on the EAP670 and test from wireless and wired clients.  Refer to this article for running iperf on the EAP: https://www.tp-link.com/us/support/faq/3105/  (If you use the Omada Controller, you can use the Network Tools->Terminal there instead of ssh).

  0  
  0  
#3
Options