Pharos WBS210/510 replacement PtMP
I am preparing Pharos WBS solution for PtMP surveillance where CPE range upto 5Km distance and more than 4 CPE under one WBS. I came to know that WBS210/510 are EOL and no replacement mentioned under official list. Kindly support.
https://www.tp-link.com/fi/support/faq/3562/
Highly appreciate the prompt feedback.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Syed-Masood
Yes, WBS products are end of life.
You may consider CPE710 devices.
Below are the config guide for your reference:
How to build a Wireless Network between home and farm using tp-link products
- Copy Link
- Report Inappropriate Content
Hi @Syed-Masood
Yes, WBS products are end of life.
You may consider CPE710 devices.
Below are the config guide for your reference:
How to build a Wireless Network between home and farm using tp-link products
- Copy Link
- Report Inappropriate Content
@Vincent-TP Shall I consider a combination of AP mode CPE710/ Client mode CPE610/CPE510 as working solution? Please suggest.
- Copy Link
- Report Inappropriate Content
Hi @Syed-Masood
Combining a CPE710 in AP mode with CPE610 or CPE510 in client mode can work as a solution.
Recommendations
-
For Wide-Area Coverage: If you need to cover a large area (e.g., 360 degrees), consider using multiple CPE510s in client mode with a CPE510 in AP mode. This setup can provide better coverage due to the wider beamwidth of the CPE510.
-
For Long-Range, High-Speed Point-to-Point Connections: Use the CPE710 in AP mode and CPE710 in client mode. This combination leverages the high speed and long range of the CPE710 and the better signal reception of the CPE610.
One more big difference: CPE710 has gigabit LAN port, while CPE510 and CPE610 are limited to 100M.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 110
Replies: 3
Voters 0
No one has voted for it yet.