We are using an ER-7206 V2 router with two internet connections:

• ISP 1 is connected to WAN 2.
• ISP 2 is connected to WAN/LAN 2.

The router is adopted into the Omada OC200 controller. However, we are experiencing the following issues:

1. VLAN and Bandwidth Control:
   When attempting to create VLANs or configure Bandwidth Control, we encounter an error message:
   "Something went wrong. Please try again later or contact our technical support."
2. LAN Configuration Issue:
   While trying to create a new LAN under Omada, the following warning message appears:
   "No available LAN Port. Please go to (PATH) to enable the desired LAN Port."
   Despite selecting all interfaces, the issue persists.
3. Internet Settings Error:
   Under Settings > Internet > Wired & Wireless Networks > Internet, we face the same error message:
   "Something went wrong. Please try again later or contact our technical support."

   We are using an ER-7206 V2 router with two internet connections:

4. ISP 1 is connected to WAN 2.
5. ISP 2 is connected to WAN/LAN 2.

6. The router is adopted into the Omada OC200 controller. However, we are experiencing the following issues:

7. VLAN and Bandwidth Control:
   When attempting to create VLANs or configure Bandwidth Control, we encounter an error message:
   "Something went wrong. Please try again later or contact our technical support."
8. LAN Configuration Issue:
   While trying to create a new LAN under Omada, the following warning message appears:
   "No available LAN Port. Please go to (PATH) to enable the desired LAN Port."
   Despite selecting all interfaces, the issue persists.
9. Internet Settings Error:
   Under Settings > Internet > Wired & Wireless Networks > Internet, we face the same error message:
   "Something went wrong. Please try again later or contact our technical support." WAN Mode Apply and Cancel button not working no Data Showing