Early Access ER7212PC V1 1.3.0 Build 20250117 Pre-Release Firmware (Released on Jan 23rd, 2025)
This Article Applies to
ER7212PC(UN) V1
Release Notes
Version Info:
Adapted Model: ER7212PC(UN) 1.0
Fully Adapted Controller Version: SDNC 5.14. It has adapted to ES series models.
Minimum FW Version for Update: none.
New Features:
1. Update the controller version to 5.14.34.
2. Add support for OpenAPI
3. Add support for Alias IP
4. Add support for Virtual WAN
5. Add support to disable NAT
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways
Firmware Download Link
ER7212PC(UN)_V1_1.3.0_Build20250117
Notes:
(1) The above firmware applies to the described models.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:
- Omada Controller version
- Device Firmware version with Build number (previous and current)
If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
How to use the Emergency Mode to recover the firmware for Omada Gateways
Update Log
Jan 23rd, 2024:
Release of this post.
Recommended Threads
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @RockPaper
Thanks for posting in our business forum.
RockPaper wrote
Hello, I've put the 1.3.0 build 20250117 Rel.82359 firmware onto my ER7212PC.
I noticed when looking at the Clients list in my network that the units for RX Rate and TX Rate seem to be wrong (kbps instead of mbps, bps not kbps). (I cross checked this with my Windows laptop that shows "Mbps" as the units for the connection on the client side).
I'm not sure about the Download and Upload units, but they also seem low.
Are you referring to the inconsistency in your observation and monitoring? Or the unit is not correct? MB and Byte/s?
And, the rate sync is not instant. Always has a latency in that.
- Copy Link
- Report Inappropriate Content
Regarding Roam events being presented with a missing "from" AP name...
> Scrolling back to before I updated the ER7212PC firmware a similar message was logged correctly
Yes, it's fine with the release firmware 1.2.0
- Copy Link
- Report Inappropriate Content
> Or the unit is not correct? MB and Byte/s?
> And, the rate sync is not instant. Always has a latency in that.
The units are wrong - this new screenshot shows Kbps and Bps units after some days of use for clients connected with "100%" signal. The clients are working as expected with good speeds and the Omada UI is obviously putting the wrong units on for RX RATE, TX RATE, and I think also ACTIVITY DOWNLOAD SPEED, DOWNLOAD, and UPLOAD.
- Copy Link
- Report Inappropriate Content
Statistics > Performance > [My Router]
No statistics are available for the router memory usage. If I show the same chart but select one of my access points then I see CPU and memory usage presented in the bottom chart.
- Copy Link
- Report Inappropriate Content
Hi @RockPaper
Thanks for posting in our business forum.
RockPaper wrote
Statistics > Performance > [My Router]
No statistics are available for the router memory usage. If I show the same chart but select one of my access points then I see CPU and memory usage presented in the bottom chart.
That looks like a bug. I will confirm with the team.
- Copy Link
- Report Inappropriate Content
Hi @RockPaper
Thanks for posting in our business forum.
RockPaper wrote
> Or the unit is not correct? MB and Byte/s?
> And, the rate sync is not instant. Always has a latency in that.
The units are wrong - this new screenshot shows Kbps and Bps units after some days of use for clients connected with "100%" signal. The clients are working as expected with good speeds and the Omada UI is obviously putting the wrong units on for RX RATE, TX RATE, and I think also ACTIVITY DOWNLOAD SPEED, DOWNLOAD, and UPLOAD.
Sorry that I failed to see this as a bug.
Unless you can prove to me that the 2.0 KBps is not referring to 2,000 Bps.
I mean 2.0 KBps refers to the client currently using 2,000 Bps.
The baseline unit is B(ytes)ps. So, 2 KB is not a faulty one.
The rate is separate. RX and TX is a chart. While the download is another chart. MB and KBps Bps is another one. In the download, usually, we refer to the computer unit which is MB. GB. Not Mb or Gb.
- Copy Link
- Report Inappropriate Content
Hi @RockPaper
Thanks for posting in our business forum.
RockPaper wrote
Regarding Roam events being presented with a missing "from" AP name...
> Scrolling back to before I updated the ER7212PC firmware a similar message was logged correctly
Yes, it's fine with the release firmware 1.2.0
Pre-Release is not gonna be adapted by the official release app.
Even if the router's new official firmware has been released, it might take a while before the app adapts to it. This question can be considered as solved. Might wait for the official release and another update on the app. This is the downside of the PR or Beta firmware.
- Copy Link
- Report Inappropriate Content
> you can prove to me that the 2.0 KBps is not referring to 2,000 Bps.
TX and RX RATE units are incorrect in the [Controller] > [Network]> Clients list of the ER7212PC firmware 1.3.0 build 20250117 Rel.82359
The units are shown correctly if I click on the device and select "Statistics". Both views are shown in the screenshot below, and below that I've added a screenshot showing the connection speed (with units) as reported by the client:
At the client:
Mbps: Millions of *bits* per second.
The AP is configured with 40MHz channel width and is on 5GHz using control channel 40.
- Copy Link
- Report Inappropriate Content
Is the ER7212PC serial number supposed to be displayed in the Controller Status panel? In firmware 1.3.0 Build 20250117 Pre-Release *and* in the official 1.2.0 release I just see zeros:
[Controller] > Settings > System Settings > Controller Status panel
Controller Status
Serial Number
0000000000000
(My screenshot isn't uploading)
- Copy Link
- Report Inappropriate Content
In the V1 1.3.0 Build 20250117 Pre-Release Firmware I've added ISP Load chart to my dashboard. The Throughput data is showing, but Latency is always reported as 0 which is not correct:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1816
Replies: 30
Voters 0
No one has voted for it yet.