DHCP VLAN Relay Not Giving Correct Scope

UMB8998

2024-11-21 03:36:47

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-01-17

DHCP VLAN Relay Not Giving Correct Scope

2024-11-21 03:36:47

Hello,

I have an issue with DHCP Relay for VLANS, basically the DHCP server is giving an IP from the switch vlan scope instead of the other vlan, I have followed this guide: https://www.tp-link.com/us/support/faq/4009/ and I have the switch running with an omada controller.

If I setup an IP for the client vlan on the switch, I have no problem the DHCP server get the request from the switch with the IP of the client VLAN and gives the IP from that scope.

I'm not sure if I'm missing something

P.S. Sorry for my bad english

1 Reply

Vincent-TP

2024-11-21 09:18:18

Posts: 1151

Helpful: 117

Solutions: 440

Stories: 0

Registered: 2024-06-22

Re:DHCP VLAN Relay Not Giving Correct Scope

2024-11-21 09:18:18

Hi @UMB8998

To better understand the issue, please let us know the following info:

1. The model number, hardware version, and firmware version of your switch;

2. The type of the controller you are using, the firmware version of the controller;

3. The topology of your network;

4. Some screenshots of the DHCP VLAN Relay configuration.

5. Which IP address are the DHCP clients get?

DHCP VLAN Relay Not Giving Correct Scope

DHCP VLAN Relay Not Giving Correct Scope

Information

Voters 0

Tags