ER605 wan issue
Hi,
I have just bought a new ER605 router to compliment my full TP link setup that i have, the issue i've got is that when i configure the wan port just like my old TL-R600VPN
its giving me a completly different WAN ip address which is a local ip it seems to treating it as a lan rather than wan port for some reason i've flashed it to the latest firmware but its still the same I'm hoping someone can shed some light on whats going wrong i've attached both routers to show the difference between them.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Cannonz
Thanks for posting in our business forum.
This is not a problem at the router's system level.
You should contact your ISP regarding this matter.
Not sure the reason why but your ISP defines the IP and gateway based on the PPPoE.
It's either behind a modem router. Or your ISP withdraws your public IP address for a reason.
- Copy Link
- Report Inappropriate Content
Hi @Cannonz
Thanks for posting in our business forum.
This is not a problem at the router's system level.
You should contact your ISP regarding this matter.
Not sure the reason why but your ISP defines the IP and gateway based on the PPPoE.
It's either behind a modem router. Or your ISP withdraws your public IP address for a reason.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 48
Replies: 1
Voters 0
No one has voted for it yet.