CPE 710 or 610 can connect on Lan
Good day, its been months since i test my CPE 710, since its my extra. When tym comes to use it, i cannot access the LAN. Reset it, but to no avail. I've check the LAN Network on my computer it on "X' Mark, so i checked the Led Indicator its not Turned On. It does have Power. Wifi Indicator Led is off also since i didn't configured it yet.
is it bricked? or any turned around on this
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If this issue only happens on that poe adapter, you may contact your retailer to check warratny.
- Copy Link
- Report Inappropriate Content
Hi @akikoy
What's the operation mode of the CPE did you configure?
CPE is not plug-and-play, we need to configure it first.
Please let us know how you want to use this CPE.
- Copy Link
- Report Inappropriate Content
Have you tried using a different Ethernet cable or port to rule out Hindi Shayari hardware issues. Sometimes a faulty cable can cause the LAN connection to show an 'X' mark.
- Copy Link
- Report Inappropriate Content
@Vincent-TP i have change the cable, but to no avail, problem still exist ....
- Copy Link
- Report Inappropriate Content
Hi @akikoy
The X mark is because the PC could detect an ethernet connection, this is mostly hardware reason. It's either the CPE POE adapter or the ETH adapter of the PC you are using.
Please change the PC you are using. Or change to a different ethernet adapter.
- Copy Link
- Report Inappropriate Content
@Vincent-TP same i have laptop and pc, like i said this antenna is my extra, i have 2 -710, 4-610, numerous 605, i dont have shortage of poe adaptor
- Copy Link
- Report Inappropriate Content
If this issue only happens on that poe adapter, you may contact your retailer to check warratny.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 157
Replies: 6
Voters 0
No one has voted for it yet.