Usage of Radius Proxy in Controller Mode"
I have multiple EAP773s under my controller (the firmware has been updated to 1.0.14 Build 20240801), and I have set the Radius Proxy on the controller, and correctly set the IP of the controller in my Radius Server, but the error persists. Does not take effect,Please help with user guide。
I recorded packets using Wireshark from the Radius Server (NPS), and I can only see that the source for authentication is EAP (IP 192.168.0.127), not the Omada controller (IP 192.168.0.1).
It can be confirmed that the Radius Proxy feature is not enabled. Could you provide an overall configuration guide to help identify the problem areas? Thank you.
Also tested using Freeradius for verification
You can see that the verification client IPs are all EAP IPs and not from the controller.
