Wifi client needs to access local web server with different ip.
I have a Omada controlled Wifi network with Local user authentication, whenever i connect to the Wifi im given a 192.168.55.1/24 ip but my problem is i want to connect to a web server with different ip 192.168.10.1/24 on the same switch. What configuration to make? I'm new to networking.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @pandesal
Thanks for posting in our business forum.
pandesal wrote
I have search the Knowledge Base and Configuration Guides but i cant find the right solution or i just don't understand.
But i have my diagram:
I just want the wireless connection from Network A to access the HTTP server at Network B denying other devices from Network B to access Network A.
I have read about ACL, i cant make it work, i even have to reset everything because i mistakenly block everything.
Thanks.
A to B, allow.
B to A, deny.
SW ACL: A to B, IP-Group SRC all A IPs and ports to DST IP-port(B web server) protocol TCP.
SW ACL: B to A, Network/IP, SRC B to DST A, protocol all.
Have you tried this? What guide did you refer to and you were not able to figure it out?
- Copy Link
- Report Inappropriate Content
@pandesal to everyone who responded to my post, thank you. I got it, i just keep on digging other post and tutorials, videos. I'll keep on learning.
Thanks.
I'll just post again if i run into problems again.
The original network was that 192.168.10.1/24 was on another router. i tried routing, port forwarding to the web server but wont connect.
Maybe i just did'nt know how to do it correctly.
What i did was to create a VLAN 192.168.10.1/24 on Omada. and connected the web server directly to one of the switches and assign the profile
to what port the other network is connected, and it worked.
- Copy Link
- Report Inappropriate Content
Hi @pandesal
Thanks for posting in our business forum.
If you are new to the system, please kindly read the Knowledge Base and Configuration Guide articles beforehand.
If you are using the Omada system, inter-VLAN is accessible by default. If you have trouble with inter-VLAN access, please make sure you disable ACL or configure ACL accordingly.
If you expect to get more concrete suggestions, please make sure add some specific details, diagram or config for reference.
- Copy Link
- Report Inappropriate Content
I have search the Knowledge Base and Configuration Guides but i cant find the right solution or i just don't understand.
But i have my diagram:
I just want the wireless connection from Network A to access the HTTP server at Network B denying other devices from Network B to access Network A.
I have read about ACL, i cant make it work, i even have to reset everything because i mistakenly block everything.
Thanks.
- Copy Link
- Report Inappropriate Content
Hi @pandesal
Thanks for posting in our business forum.
pandesal wrote
I have search the Knowledge Base and Configuration Guides but i cant find the right solution or i just don't understand.
But i have my diagram:
I just want the wireless connection from Network A to access the HTTP server at Network B denying other devices from Network B to access Network A.
I have read about ACL, i cant make it work, i even have to reset everything because i mistakenly block everything.
Thanks.
A to B, allow.
B to A, deny.
SW ACL: A to B, IP-Group SRC all A IPs and ports to DST IP-port(B web server) protocol TCP.
SW ACL: B to A, Network/IP, SRC B to DST A, protocol all.
Have you tried this? What guide did you refer to and you were not able to figure it out?
- Copy Link
- Report Inappropriate Content
@pandesal What kind of webserver (website, nas,etc.) is this, how are you interfacing with it (eg windows explorer, browser, etc.? ) Without knowing more we cant tell if this is a network issue or a service issue.
- Copy Link
- Report Inappropriate Content
@pandesal to everyone who responded to my post, thank you. I got it, i just keep on digging other post and tutorials, videos. I'll keep on learning.
Thanks.
I'll just post again if i run into problems again.
The original network was that 192.168.10.1/24 was on another router. i tried routing, port forwarding to the web server but wont connect.
Maybe i just did'nt know how to do it correctly.
What i did was to create a VLAN 192.168.10.1/24 on Omada. and connected the web server directly to one of the switches and assign the profile
to what port the other network is connected, and it worked.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 254
Replies: 5
Voters 0
No one has voted for it yet.