EAP 215 TX Power

LittleJerry

2024-09-02 22:56:53 - last edited 2024-09-03 08:14:25

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-02

EAP 215 TX Power

2024-09-02 22:56:53 - last edited 2024-09-03 08:14:25

Model: EAP215-Bridge KIT

Hardware Version:

Firmware Version:

Can anyone confirm that the TX Power (EIRP) setting in the tplinkeap.net standalone does indeed include the antenna gain? It does say it in the software that it includes antenna gain but I had a tplink support person tell me it didn't?

The setting allows for 12-30 dbm.

Excuse my ignorance but if I have it set at 12dbm, does that mean with the 11dbi antenna, that roughly the Transmit power of the unit is only like 1 dbm if there are no other losses?

Appreciate any help

Regards

Adam

1 Accepted Solution

Hank21

2024-09-03 08:13:45 - last edited 2024-09-03 08:26:32

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:EAP 215 TX Power-Solution

2024-09-03 08:13:45 - last edited 2024-09-03 08:26:32

@LittleJerry

I have helped you double-confirm. It does include the antenna gain, and you can notice that there is a notice below the EIRP settings. And your understanding about the EIRP is correct; if the value set to be 12 dBm, then the rough transmission power is 1 dBm with no other loss.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

EAP 215 TX Power

EAP 215 TX Power

Information

Voters 0

Tags