Home

Forums

Stories

Knowledge Base

Business Community > SOHO Switches > VLan

< SOHO Switches

VLan

corkscrew22

2024-08-31 11:13:46 - last edited 2024-09-05 01:12:58

Posts: 28

Helpful: 3

Solutions: 1

Stories: 0

Registered: 2024-06-22

VLan

2024-08-31 11:13:46 - last edited 2024-09-05 01:12:58

Model: TL-SG108PE

Hardware Version: V5

Firmware Version: 1.0.0 Build 20220930 Rel.36161

I'm a novice and this is the first time i have set up vlans (multiple attempts before i could get it to work).

the picture shows the network i have created it all appears to work fine with everything being able to connect to the internet and the vlans are I think segregated from each other.

a couple questions

I read somewhere on this forum that I should remove "non trunk ports" from vlan 1 in my case i assume i should remove ports 4,5,6,7 from vlan 1 is that correct?

On the AP there is no choice if you select multi ssid then SSID 1 is on VLAN 1 you cannot disable or change its VLAN so i have no choice I have to use vlan 1 if i want to have multi ssid

1 Accepted Solution

Clive_A

2024-09-02 01:32:47 - last edited 2024-09-05 01:12:58

Posts: 5543

Helpful: 2659

Solutions: 1239

Stories: 0

Registered: 2023-06-09

Re:VLan-Solution

2024-09-02 01:32:47 - last edited 2024-09-05 01:12:58

Hi @corkscrew22

Thanks for posting in our business forum.

No.

Correct.

On the pinned threads on this switch page, you have explanations on VLAN and a generic guide.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

corkscrew22

LV2

2024-09-02 10:31:07

Posts: 28

Helpful: 3

Solutions: 1

Stories: 0

Registered: 2024-06-22

Re:VLan

2024-09-02 10:31:07

Hi Clive thanks for taking the time to reply. I have read your pinned threads very informative although a lot of it over me head for now. However They have raised another question for me in the network i have created i did not set up vlan interfaces in the ER605 and all works fine. Am i right in thinking i only need to set up vlan interfaces in the ER605 if i want to put the vlans on separate subnets same as in some of your examples

Clive_A

2024-09-03 00:52:26

Posts: 5543

Helpful: 2659

Solutions: 1239

Stories: 0

Registered: 2023-06-09

Re:VLan

2024-09-03 00:52:26

Hi @corkscrew22

Thanks for posting in our business forum.

corkscrew22 wrote

Hi Clive thanks for taking the time to reply. I have read your pinned threads very informative although a lot of it over me head for now. However They have raised another question for me in the network i have created i did not set up vlan interfaces in the ER605 and all works fine. Am i right in thinking i only need to set up vlan interfaces in the ER605 if i want to put the vlans on separate subnets same as in some of your examples

With the readings, you should know that this setup you have now is not VLAN interface-based.

If you want to use the VLAN interface-based, you are getting the network segment. That's the interface on the ER605 and VLAN tag/untag on the switches.

VLan

VLan

Information

Voters 0

Tags