Hello,
I've got this switch L2+/L3 controlled by omada. I've got my own gateway.
I can configure dhcp with specific ipv4 mask address for each vlan.
But i don't find how to have the same configuration with ipv6. I would expect to configure a radvd daemon making the switch sending advertisement frames on each vlan, and able to route ipv6 in the same way.
Is it possible?
Hi @MRuellan
We also don't have much experience about this. However in normal case all these things should be done on your router. The switch is working on Data Link layer, it has VLAN but won't need to do the routing.
If you want to do static routing on the switch, then you will have to reset the switch and manage it via standalone. Only in standalone mode we can add IPv4/IPv6 static routing to the switch.
At the moment I'm able to do static routing with omada with ipv4. The routing with ipv6 works well. I've tested it by setting manually the default ipv6 gateway on my laptop. The only missing thing is the advertisement. My understanding is : with ipv6, by design the advertisement can't be done from another device than the gateway itself.
Actually, i'm doing the routing with my own router, it's a workaround because it's a huge bottleneck, i'm not using the switch backplane.
Helpful: 0
Views: 226
Replies: 2
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
