ER8411 Pre-purchase questions.

ER8411 Pre-purchase questions.

ER8411 Pre-purchase questions.
ER8411 Pre-purchase questions.
2024-06-24 07:58:54 - last edited 2024-06-25 01:49:41
Model: ER8411  
Hardware Version:
Firmware Version:

Looking at procuring an ER8411. However, a couple of questions I have which are make & break for me.

1: Can you define multiple public IPs on the WAN interface, which would be PPPoE in my case? In addition, can you perform DST & SRC NAT using those IPs?

For example, I'd need to port forward 443 from public IP A to 10.0.0.1 and I'd also need 10.0.0.2 to have public IP B when performing a what is my ip lookup.

 

2: Does the WAN 10G SFP+ have to be for WAN, or could it be assigned to LAN? For example, I'd like to connect 2 switches direct to the router using DAC. Then connect the ONT from my internet service to one of the ports on a switch, presenting that as a VLAN and configuring PPPoE on the router to use that.

I also intend to be using an Omada controller to manage this all, if that makes any difference.

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER8411 Pre-purchase questions.-Solution
2024-06-25 01:49:37 - last edited 2024-06-25 01:52:40

Hi @mg4455 

Thanks for posting in our business forum.

1. No to both.

How to configure One-to-One NAT on Safestream routers using the new GUI

WAN Alias which is something to your description, but it does not support PPPoE.

2. Dual SFP+. One is dedicated WAN, one is WAN/LAN.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:ER8411 Pre-purchase questions.-Solution
2024-06-25 01:49:37 - last edited 2024-06-25 01:52:40

Hi @mg4455 

Thanks for posting in our business forum.

1. No to both.

How to configure One-to-One NAT on Safestream routers using the new GUI

WAN Alias which is something to your description, but it does not support PPPoE.

2. Dual SFP+. One is dedicated WAN, one is WAN/LAN.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#2
Options