ER707-M2 tplink router layer 3
Hi guys,
i have been trying to make this router as layer 3 switch since my nranch office has core network with multiple vlan inside.
succesfully connected ipsec vpn with main office but all traffic could not pass through from lan port to wan port
i can ping to lan port (from branch office) but all trafic could not pass through.
how can i configured it ?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @ITuser2
Thanks for posting in our business forum.
1. IPsec is not supposed to forward all traffic.
2. Not very sure about what your description "from lan port to wan port" means.
- Copy Link
- Report Inappropriate Content
branch office lan -> lan port -> tp link > wan port (vpn ipsec) -> internet > (vpn ipsec hq) -> hq office
user in branch office can ping lan port tplink
vpn ipsec succesfully connected with both side.
but from tp link could not forward all internal ip to hq office lan
- Copy Link
- Report Inappropriate Content
Hi @ITuser2
Thanks for posting in our business forum.
ITuser2 wrote
branch office lan -> lan port -> tp link > wan port (vpn ipsec) -> internet > (vpn ipsec hq) -> hq office
user in branch office can ping lan port tplink
vpn ipsec succesfully connected with both side.
but from tp link could not forward all internal ip to hq office lan
Screenshots I require:
IPsec config of your remote subnet setting on the router.
Remote HQ IPsec config as well.
Ping from Branch LAN to HQ (remote subnet's) default gateway IP address.
- Copy Link
- Report Inappropriate Content
Hi @ITuser2
I understand the privacy but this is not helpful to me at all.
I still don't understand your ping and what's the meaning of it. I asked you to ping the default gateway IP and it's IP is not a public IP which should be no problem to expose. I ask you to use a PC from the branch LAN to ping that and share the screenshots.
Think in my shoes. With the information provided so far, I don't have any suggestions or comments. I recommend you check your parameters and make sure they are correct.
- Copy Link
- Report Inappropriate Content
hi clive, this is the design and ping screenshot, the reason before was the screenshot had public ip.
- Copy Link
- Report Inappropriate Content
hi clive,
any plan to reply my post?
- Copy Link
- Report Inappropriate Content
Hi @ITuser2
ITuser2 wrote
hi clive,
any plan to reply my post?
Sorry for my bad understanding and reading ability I don't understand your question and your picture. I don't have a comment on your described issue and that was the reason why I did not reply.
Like the first post, the IPsec is not gonna forward all the traffic because it does not support(have) a proxy mode. And if this is not your question, please describe it again.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 752
Replies: 7
Voters 0
No one has voted for it yet.