Business Community > Routers > Setting up ER7206 as a wiregaurd client
< Routers

Setting up ER7206 as a wiregaurd client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting up ER7206 as a wiregaurd client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting up ER7206 as a wiregaurd client
Setting up ER7206 as a wiregaurd client
2024-06-05 13:53:39 - last edited 2024-06-06 02:44:01
Tags: #WireGuard
Model: ER7206 (TL-ER7206)  
Hardware Version:
Firmware Version:

Hi,

 

Can any one tell me how to configure my ER7206 Router as a Wireguard Client?

 

I see a lot of instructions saying how to configure as a server, but I didn't find much on how to setup as a client

 

I have a hosted wireguard server in a data center and want my ER7206 router act as a Wireguard client, so that I can access the devices connected to it.

 

I don't want to access the whole network ( 0.0.0.0/0 ) just a subnet.

 

If any one know how to do it, please let me know

 

thanks in advance

Navas

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Setting up ER7206 as a wiregaurd client-Solution
2024-06-06 01:12:21 - last edited 2024-06-06 02:44:01

Hi @Navas1 

Thanks for posting in our business forum.

Not very sure about where you read the configuration guide. If you read it from the forum, you should see the steps on how to set it up as a client. Actually as a peer. Please try out the guides on our forum.

TBH, there is no client to site or any traditional terms to call the WireGuard. All WG are peer to peer but you can change the allowed IP to use it differently.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:Setting up ER7206 as a wiregaurd client-Solution
2024-06-06 01:12:21 - last edited 2024-06-06 02:44:01

Hi @Navas1 

Thanks for posting in our business forum.

Not very sure about where you read the configuration guide. If you read it from the forum, you should see the steps on how to set it up as a client. Actually as a peer. Please try out the guides on our forum.

TBH, there is no client to site or any traditional terms to call the WireGuard. All WG are peer to peer but you can change the allowed IP to use it differently.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:Setting up ER7206 as a wiregaurd client
2024-06-06 02:37:20

 

Yes, I just wanted to setup my device as a peer. so that I can access my other wireguard clients setup in different places.

 

I used to set this up in a cheaper TP-Link router using openwrt, but I coudln't find anything ( Sorry if I didn't search enough ) useful for setting this up on this expensive device.

 

Can you please guide me or point where to look for the info ?

 

My wireguard server is setup in a remote datacenter and I have different PC's connecting to that server, and I want this router to act like one of them, so that I can access all my wireguard peers.

 

Does this make sense? Please let me know when you get a chance.

 

Thanks

Navas

 

  0  
  0  
#3
Options
Re:Setting up ER7206 as a wiregaurd client
2024-06-06 02:40:44

Hi @Navas1 

Thanks for posting in our business forum.

Navas1 wrote

 

Yes, I just wanted to setup my device as a peer. so that I can access my other wireguard clients setup in different places.

 

I used to set this up in a cheaper TP-Link router using openwrt, but I coudln't find anything ( Sorry if I didn't search enough ) useful for setting this up on this expensive device.

 

Can you please guide me or point where to look for the info ?

 

My wireguard server is setup in a remote datacenter and I have different PC's connecting to that server, and I want this router to act like one of them, so that I can access all my wireguard peers.

 

Does this make sense? Please let me know when you get a chance.

 

Thanks

Navas

 

On the router page, you find the first thread on how to use the forum effectively.

Please try to understand how our forum works. If you just intend to get a walk-through on Wireguard, you should refer to some videos on Youtube. As Wireguard setup is universal.

Click the label, you should look for the Wireguard setup. I think it is pretty easy to find several guides about the Wireguard VPN.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Setting up ER7206 as a wiregaurd client
2024-06-09 16:24:57

OK,

 

I was managed to setup the Wireguard peer, but I can't ping my wireguard client from my PC, however, I was able to do it within the router

 

routing table list the following,  Can any one tell me what is wrong.

 

 

1 0.0.0.0 0.0.0.0 192.168.68.1 WAN2 0
2 192.168.0.0 255.255.255.0 0.0.0.0 LAN 0
3 192.168.4.0 255.255.255.0 0.0.0.0 WG 9999
4 192.168.68.0 255.255.252.0 0.0.0.0 WAN2 0
5 192.168.68.1 255.255.255.255 0.0.0.0 WAN2 0
6 192.168.200.1 255.255.255.255 192.168.68.1 WAN2 0
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 640

Replies: 4

Tags

WireGuard
Related Articles
setting up er7206 with ipsec vpn and access control
479 0
 ER7206 - Wireguard "Allowed Address" issue
3376 0
 ER7206 OpenVPN as Client
952 0
Need help in setting up ER7206 router through Omada controller for a remote site.
1535 0
Wireguard VPN - ER7206 Omada SDN
2485 0
Wiregaurd and internal DNS
231 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.