Need advice for ER605 v2.0 settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Need advice for ER605 v2.0 settings

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

imeera

2024-04-09 10:51:25 - last edited 2024-04-10 01:34:53

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-04-09

Need advice for ER605 v2.0 settings

2024-04-09 10:51:25 - last edited 2024-04-10 01:34:53

Model: ER605 (TL-R605)

Hardware Version: V2

Firmware Version: 2.1.2 Build 20230210 Rel.62992

Hello,

I am trying to set up Omada system.

My router is ER605 v2.0, Hardware controller OC200 and the Switch TL-SG2008P

at the router setup I receive IP conflict the IP address is 192.168.0.1 the error message is

"The IP addresses/Gateway of the WAN and LAN port Should not in a same subnet."

Would any body advice what I am missing.

Thank you for your time in advance.

1 Accepted Solution

Clive_A

2024-04-10 01:34:50 - last edited 2024-04-10 01:34:53

Posts: 5567

Helpful: 2674

Solutions: 1246

Stories: 0

Registered: 2023-06-09

Re:Need advice for ER605 v2.0 settings-Solution

2024-04-10 01:34:50 - last edited 2024-04-10 01:34:53

Hi @imeera

Thanks for posting in our business forum.

The literal meaning of the error. Your WAN is 192.168.0.1/24 and this is not gonna be correct if you set the LAN to 192.168.0.1/24.

So, consider setting the LAN to a different subnet like 192.168.1.1/24.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Need advice for ER605 v2.0 settings

Need advice for ER605 v2.0 settings

Information

Voters 0

Tags