Replace Main Network Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Replace Main Network Switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Replace Main Network Switch
Replace Main Network Switch
2024-02-14 02:01:33 - last edited 2024-02-18 03:17:43
Model: SG2008P  
Hardware Version: V1
Firmware Version: 1.0.8

I have a site that has a SG2008p as the main switch and would like to replace it with a SG2210MP. Is there an easy was to transfer settings with limited downtime? Looking around the settings it looks like the is a copy config from other device on network option. Would that do it? 
 

We are needing to add a fiber run to the other end if building. So wanted to go with a cleaner option instead of adding a separate fiber converter.

We already have 1 fiber run and fiber converter. 

 

Network:
Modem -> ER605 -> SG2008p (with OC200)-> Other switches and EAPs

 

Using VLANs and ACLs. It is a simple setup.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Replace Main Network Switch-Solution
2024-02-18 03:17:40 - last edited 2024-02-18 03:17:43

Hi @WigTech 

Thanks for posting in our business forum.

Adopt the new switch to the controller and configure it. When it is done, use some devices to test if it is ready. If it is ready, then enter the downtime and move the wires to this new switch.
The switch setup is basically the same unless you have set up some parameters that are unique to the switch. That would require your time to config them.

 

There is no way to copy the config from one switch to another one. You cannot merge backups of different models to the switches.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Replace Main Network Switch-Solution
2024-02-18 03:17:40 - last edited 2024-02-18 03:17:43

Hi @WigTech 

Thanks for posting in our business forum.

Adopt the new switch to the controller and configure it. When it is done, use some devices to test if it is ready. If it is ready, then enter the downtime and move the wires to this new switch.
The switch setup is basically the same unless you have set up some parameters that are unique to the switch. That would require your time to config them.

 

There is no way to copy the config from one switch to another one. You cannot merge backups of different models to the switches.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options