ER605 too long to detect second link.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 too long to detect second link.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 too long to detect second link.
ER605 too long to detect second link.
2024-02-09 13:16:45 - last edited 2024-02-18 01:37:00
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4

 

Hi. 

 

I have a annoying thing happened to my Network, I have 2 starlink but when 1st starlink goes down it's so long to wait until it detect and get second ISP sometimes I have to wait up to 10 minutes or more. 

 

I have 2 Starlink connected to ER605 then to Mikrotik Router HexGr3.

Starlink > ER605 > Mikrotik Hex Gr3 > LAN

 

settings

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 too long to detect second link.-Solution
2024-02-10 03:38:00 - last edited 2024-02-18 01:39:12

Hi @Mellx1 

If so, it does not look like a problem with the router parameters. 1 second is the minimum interval you can set.

 

In addition, as long as it is ping-able from that WAN, it will not be considered as WAN down.

If you have a question about this, please read:

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:ER605 too long to detect second link.-Solution
2024-02-10 03:38:00 - last edited 2024-02-18 01:39:12

Hi @Mellx1 

If so, it does not look like a problem with the router parameters. 1 second is the minimum interval you can set.

 

In addition, as long as it is ping-able from that WAN, it will not be considered as WAN down.

If you have a question about this, please read:

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options