660HD Firmware 1.2.10, units going offline randomly until rebooted.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.660HD Firmware 1.2.10, units going offline randomly until rebooted.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I was somewhat excited for the new firmware after waiting about 1.5yrs for TP-Link to even acknowledge this unit exists.
Unfortunately, after upgrading to 1.2.10 (I missed 1.2.9 as i gave up on updates) my 2 660HD are randomly crashing and reporting disconnected, a simple reboot (POE switched off then on from switch) allows them to come online for 1-7 days roughly before crashing again.
Anyone else seeing issues on the 660HD with 1.2.10 (and maybe 1.2.9)
I am downgrading them to 1.2.9 to see if it helps.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
For anyone who finds this, It seems 1.2.11 may have fixed the issue, My APs made it 5days, but then there was a power outage.
I am now Beta testing 1.3.0, ill see if I have any issues with it.
- Copy Link
- Report Inappropriate Content
Have you downgraded it? I haven't seen a similar issue for EAP660 firmware upgrades related, have you changed or checked the power supply?
What's the firmware version of the controller?
- Copy Link
- Report Inappropriate Content
When I was posting that I was in the process of downgrading them to 1.2.9, It's too early to tell at this point.
These units have run flawless for over a year and a half with the old 1.1.0 firmware as there was nothing else available, and it wasn't until they were upgraded to 1.2.10 that this started.
They are being POE powered from a switch. And I don't really have a way to power them any differently currently.
- Copy Link
- Report Inappropriate Content
So I guess it didn't take long, One of the APs crashed out again on 1.2.9, rolling it back to 1.1.1, which is the version they were on for over a year and a half (I incorrectly called it 1.1.10 earlier)
- Copy Link
- Report Inappropriate Content
Hello @Napsterbater,
Thanks for reporting this issue to TP-Link business community!
May I know the firmware version of your controller? Do you also suffer the same issue on the EAP 1.2.9 firmware?
Just in case, please check first if there is a problem with unstable power supply, but OFC if the problem has not recurred after the downgrade, this can be ruled out as the cause.
Napsterbater wrote
my 2 660HD are randomly crashing and reporting disconnected, a simple reboot (POE switched off then on from switch) allows them to come online for 1-7 days roughly before crashing again.
When EAPs show "Disconnected", please check whether the EAP can still communicate with the controller, you may ping it if EAPs still get valid IP addresses.
Did you set VLAN/ACL on the controller?
Are there any abnormal statistics on EAPs?
- Copy Link
- Report Inappropriate Content
Hank21 wrote
Hello @Napsterbater,
Thanks for reporting this issue to TP-Link business community!
May I know the firmware version of your controller? Do you also suffer the same issue on the EAP 1.2.9 firmware?
Just in case, please check first if there is a problem with unstable power supply, but OFC if the problem has not recurred after the downgrade, this can be ruled out as the cause.
Napsterbater wrote
my 2 660HD are randomly crashing and reporting disconnected, a simple reboot (POE switched off then on from switch) allows them to come online for 1-7 days roughly before crashing again.
When EAPs show "Disconnected", please check whether the EAP can still communicate with the controller, you may ping it if EAPs still get valid IP addresses.
Did you set VLAN/ACL on the controller?
Are there any abnormal statistics on EAPs?
The APs continued to crash on 1.2.9, I have reverted them to 1.1.1. I am at 2 days 1hr of uptime so a little early, but still monitoring. The APs are POE powered, not able to currently test another method, but if they stay stable on 1.1.1 that would rule it out. And of course these ran for 1.5+ years (w/reboot and power outages of course) on 1.1.1 with no issue and it didn't start until they went from 1.1.1 to 1.2.10.
Controller is on 5.13.23 Windows Server 2022
No response at ALL from the AP, even packet count from the switch port after a counter reset shows 0 packet received from the device over 15 mins, until rebooted.
The SSIDs have VLANs assigned/set, Mangement is Native VLAN "1", no EAP (or any) ACLs. I only have 2 EAP660HDs on this controller, no Swtiches Other APs or anything else.
- Copy Link
- Report Inappropriate Content
@Napsterbater Uptime is upto 3days 3hrs on 1.1.1, it is looking like something with 1.2.9 and 1.2.10 is causing the crashes.
- Copy Link
- Report Inappropriate Content
Hi @Napsterbater,
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID240202826, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Napsterbater，
That's great! Please feel free to reply to the support email for further follow-up.
- Copy Link
- Report Inappropriate Content
BTW, for anyone who finds this.
Support was useless.
No resolution, reverted the units to 1.1.1 and left them.
1.2.9 and 1.2.10 is useless.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1636
Replies: 19
Voters 0
No one has voted for it yet.