Slow/unstable networking speed EAP683 LR(EU) v1.0 using VLAN

Slow/unstable networking speed EAP683 LR(EU) v1.0 using VLAN

22 Reply
Re:Slow/unstable networking speed EAP683 LR(EU) v1.0 using VLAN -Solution
2024-08-01 18:06:18

  @Hank21 LAN info:

 

OC200 (v5.13.30.50)

ER8411

SX3206HPP

SG3218XP-M2

EAP670v2

EAP683LR(US) currently disconnected due to a high number of Rx dropped packets/errors 

 

4 VLANs with corresponding WLANs

Admin

Home

Camera

IoT

 

Was using latest firmware EAP683 UR(US)_V1.6_1.0.2 Build 20240102 with about 50-55% of Rx drop packets/errors. Switched to the suggested above EAP683LR(EU_US_CA_JP)_v1_EAP683LR(US)_v1.6_1.1.0_Build20240412(pre-release)

SLight improvement but still about 30-35% of Rx dropped packets/errors. I don't have a screen shot since i disconnected EAP683 but I was monitoring it from OC200 / Deveices / EAP683 / Radios screen.

 

To compare I also have EAP670v2 running on the latest firmware in the same setup - Zero issues. 

  0  
  0  
#22
Options
Re:Slow/unstable networking speed EAP683 LR(EU) v1.0 using VLAN -Solution
2024-08-02 06:00:02

  @WantToLikeOmada 

Is the EAP670 v2 connected to the same location as the EAP683LR? Apart from the error, are there any network problems? Does the 5G or 2.4G experience this error?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#23
Options