Hardware Controller
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, I have only basic knowledge/skill with computers & related equipment but really needed to get some wifi down to my drum studio/mancave/barn. Just installed a starlink system and went from 10Mbps (At&T) to around 160Mbps, so with a little research thought I could put in some access points to make it happen. I have a TP-Link Archer AX73 router, 5-port Gigabit Switch TL-SG105, an Omada Hardware Controller OC 200 and 2 Omada outdoor access points EAP 110. I installed all the above per directions but can not get the software to see the controller. The controller power lights are not lit. I've tested the ethernet cables and they all work. It seems the OC 200 is broke but I'd like to ask if there is something I could do to remedy this??? Maybe I missed something setting this up? Any advice would be great...thanks!
@drumguy101 Thanks for the feedback. Phil, the software I refered to was the Omada program to manage the system. I wanted to use a web browser on my laptop but couldn't get it running so defaulted to the app on my cell phone. d0ug, you're absolutely correct...that was the problem and 
actually fixed it an hour or so after posting the question. I saw the cable going into the back of the controller on a YouTube video and , although it was not explained, I figured out that it was supplying power. I assumed the SG-105 switch was a POE. Maybe I wouldn't have bought it if I knew that, but since I already had the usb micro power cable it was a simple fix. Again...thanks!!
