Business Community > WiFi > EAP225-Wall stopped working
< WiFi

EAP225-Wall stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225-Wall stopped working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225-Wall stopped working
EAP225-Wall stopped working
2023-07-21 14:05:20
Model: EAP225-Wall  
Hardware Version: V2
Firmware Version: EU

Hello, 

i have EAP225-Wall  at my home and it was working perfectly until one day electricity was gone for a day and internet connection as well. After the electricity got back and internet was fixed my extender dons't work. no light (green light) and it looks like it doesn't work. 

 

I tried connecting to the website that was in the instruction with the extender, but the link doesn't work, as well. + I don'[t see any battery or source of electricity so I don't know maybe it's just some kind of battery that died? 

 

So I don't know if it's technical issue or something else. 

 

 

p.s. yes, I checked the cables they are alright, as well as restarting the modem itself. 

 

I hope someone can help me with this problem

  0      
 
  0      
 
#1
Options
8 Reply
Re:EAP225-Wall stopped working
2023-07-21 17:34:27

  @Barefootmoses 

 

The 225-wall gets its power via the ethernet cable that enters the rear of the unit.  Do you have any other POE powered units?  Are you using a POE switch, or a POE injector to feed power to the 225?

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:EAP225-Wall stopped working
2023-07-24 12:32:51

  @d0ugmac1 It goes from my wifi router. Maybe there's some problem with the cable, but I checked it three times. everything should be working :( can it be that something happened with the extender? 

  0  
  0  
#3
Options
Re:EAP225-Wall stopped working
2023-07-24 12:42:23
Probably your POE injector was impacted by the power outage. Can you try a different power source?
<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#4
Options
Re:EAP225-Wall stopped working
2023-07-27 11:09:56

  @d0ugmac1 how could i do that? i understand that my wifi router is the power source. correct? I don't have an alternative

  0  
  0  
#5
Options
Re:EAP225-Wall stopped working
2023-07-27 13:48:17

  @Barefootmoses Most are not POE capable.   Which specific brand / model of wifi router are you using?  It's usually the switch that provides the POE power, or it's done via single injector per wire.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#6
Options
Re:EAP225-Wall stopped working
2023-08-16 08:12:40

  @d0ugmac1 thank you for all support and advice. it looks like my device burnt out. Maybe you can recommend similar range extender that doesn't need electric socket ? I have my device on the ceiling and I don't have any possibility to connect it electricity anywhere near.

  0  
  0  
#7
Options
Re:EAP225-Wall stopped working
2023-08-16 15:02:32

  @Barefootmoses 

 

So the AP itself is no good?  If so, the EAP615-wall is an excellent upgrade.  It will also get power over the ethernet cable,  so you do need a working poe injector or poe switch between your router and the new AP.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#8
Options
Re:EAP225-Wall stopped working
2023-08-17 06:42:46

  @d0ugmac1 thank you very much! I found the new device and bought it! 

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 600

Replies: 8

Related Articles
Eap225 wall plate does not power up
1564 0
EAP225-Wall power supply
2562 0
Eap225 wall poe+ output does not work
1365 0
Problem with EAP 225-Wall (DHCP)
2153 0
 EAP225-Wall VLAN
4523 0
 EAP225 Wall non si avvia
342 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.