Business Community > Controllers > A lot of Alerts after OC200 FW update
< Controllers

A lot of Alerts after OC200 FW update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

A lot of Alerts after OC200 FW update

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
A lot of Alerts after OC200 FW update
A lot of Alerts after OC200 FW update
2023-07-13 16:42:00 - last edited 2023-07-14 02:05:55
Tags: #Firmware Update
Model: OC200  
Hardware Version: V1
Firmware Version: 1.25.2 Build 20230704 Rel.64541

I installed a new FW for OC200. 

Have 1878 Alerts for the last 18 hours. 

@Hank21 @Fae Please advise on what to do?

Thank you.

We craft reliable solutions | 1.855.888.0169 | https://cctv-ca.com
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:A lot of Alerts after OC200 FW update-Solution
2023-07-14 02:05:49 - last edited 2023-07-14 02:13:55

Hi @Alex_UTS,

 

In the new firmware of OC200, we have introduced a new feature that DHCP activities will be recorded in the log.

If you are running your whole network fine, then you don't have to worry about it. And @Giang97 is Correct, you may go to Log Settings Section to uncheck Gateway DHCP Server Module Information Option.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
4 Reply
Re:A lot of Alerts after OC200 FW update
2023-07-13 19:22:49

  @Alex_UTS I think it is just notification from controller that an IP is released for a device. If you want to turn it off, maybe you can go to your site setting >> section Logs >> Device >> uncheck alert of Gateway DHCP Client Module Informatio and Gateway DHCP Server Module Information. 

  0  
  0  
#2
Options
Re:A lot of Alerts after OC200 FW update-Solution
2023-07-14 02:05:49 - last edited 2023-07-14 02:13:55

Hi @Alex_UTS,

 

In the new firmware of OC200, we have introduced a new feature that DHCP activities will be recorded in the log.

If you are running your whole network fine, then you don't have to worry about it. And @Giang97 is Correct, you may go to Log Settings Section to uncheck Gateway DHCP Server Module Information Option.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
Re:A lot of Alerts after OC200 FW update
2023-07-14 02:24:14

  @Hank21 @Giang97 

Thank you for the reply. I'm worried because I have 80 devices in the system, but only those two clients make Alarms every minute. All other clients with DHCP never show the Alarm. Why?

We craft reliable solutions | 1.855.888.0169 | https://cctv-ca.com
  0  
  0  
#4
Options
Re:A lot of Alerts after OC200 FW update
2023-07-17 03:02:21

Hi  @Alex_UTS,

 

Could you check whether these two clients have a problem with frequent re-connection? What is the model number of these clients?

Maybe you can check the logs on these clients to confirm whether they ever disconnect from the Internet/DHCP Server frequently.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 934

Replies: 4

Tags

Firmware Update
Related Articles
OC200 update
531 0
 OC200 offline since FW update
2395 0
OC200 firmware update for custom DynamicDNS
579 1
OC200: To update or not to update?
1335 0
OC200 Cannot login using Safari after firmware update
558 0
FIFO on alerts/events
131 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.