Business Community > Routers > Adding a new Router to an existing TP-Link Omada Controlled network
< Routers

Adding a new Router to an existing TP-Link Omada Controlled network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Adding a new Router to an existing TP-Link Omada Controlled network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Adding a new Router to an existing TP-Link Omada Controlled network
Adding a new Router to an existing TP-Link Omada Controlled network
2023-07-08 21:08:57 - last edited 2023-07-10 06:56:45
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

I have an existing functional network Omada controlled network  with

1 TP-link Switch
1 OC200 Omada Controller
3 TP-link APs

When I try to add the ER605 router, but connecting the WAN/LAN1 port to the switch it does not Adopt.
What's the proper steps to take to:

a. first get the router under the control of the OC200
b. configure the router to replace the existing one.

 

Russell Sutherland russ@quist.ca
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Adding a new Router to an existing TP-Link Omada Controlled network-Solution
2023-07-09 13:27:17 - last edited 2023-07-10 06:56:45

  @Quist 

 

login to router in stand alone, set ip and username/password.

then adopt router, it will fail first time, press retry and enter username and password you created in stand alone

Recommended Solution
  3  
  3  
#4
Options
5 Reply
Re:Adding a new Router to an existing TP-Link Omada Controlled network
2023-07-09 02:38:42

  @Quist Connecting the factory defaulted router's LAN port to the switches uplink should allow it to be discovered by the controller.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:Adding a new Router to an existing TP-Link Omada Controlled network
2023-07-09 12:47:22 - last edited 2023-07-09 14:07:04

  @d0ugmac1 I am still having difficulties. Is there a special "uplink" port on the switch? Here's what things look like from the standpoint of the OC200 controller:

Or do I need to manually first configure the router to have an IP address that is on my LAN (192.168.2.0/24) and then give the OC200 the credentials I setup via the Quick Config menus?

The error message says: device does not respond to adopt commands.

Russell Sutherland russ@quist.ca
  0  
  0  
#3
Options
Re:Adding a new Router to an existing TP-Link Omada Controlled network-Solution
2023-07-09 13:27:17 - last edited 2023-07-10 06:56:45

  @Quist 

 

login to router in stand alone, set ip and username/password.

then adopt router, it will fail first time, press retry and enter username and password you created in stand alone

Recommended Solution
  3  
  3  
#4
Options
Re:Adding a new Router to an existing TP-Link Omada Controlled network
2023-07-10 00:18:33

  @MR.S Thanks. This worked.

Russell Sutherland russ@quist.ca
  0  
  0  
#5
Options
Re:Adding a new Router to an existing TP-Link Omada Controlled network
2023-07-10 17:03:45

  @Quist 

 

Just as an anecdote to this issue.  I just experienced this exact error yesterday.  It appears my 'omadad' process crashed on the router...though everything else is up and working (DHCP, SNMP, IPsec etc and the router functions as it should...for now...the memory continues to creep and I expect other processes to start dying shortly).  A power cycle alone should bring the router back in line once the device has rebooted.  Plan C would have been to just factory default the router and re-adopt from scratch.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1414

Replies: 5

Related Articles
Using TP-Link ER605 router with my existing Unifi network
1345 0
adopting existing Omada gateway in new controller OC200
2308 0
 Use new Router with existing Internet Connection
671 0
 Adding router to Omada software controller breaks it
1530 0
Adding router/gateway to Omada Controller
641 0
 Adding new omada eap650
134 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.