Business Community > Video Recorders > Cannot route NVR through VPN [FIXED]
< Video Recorders

Cannot route NVR through VPN [FIXED]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot route NVR through VPN [FIXED]

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot route NVR through VPN [FIXED]
Cannot route NVR through VPN [FIXED]
2023-05-18 01:37:33 - last edited 2024-09-19 07:43:19
Model: VIGI NVR1016H  
Hardware Version: V1
Firmware Version: 1.0.2 Build 221020 Rel.59040n

I own a VIGI NVR model VIGI NVR1016H v1 and four VIGI C300HP-4 2.0 cameras. All of the equipment is in a remote site. I am able to view the cameras over VPN from my LAN to the remote site, just by entering their IP in the Vigi Android app without linking them to tplink cloud account.

When I try to view cameras through NVR (also reachable and pingable from my LAN through VPN connection) over VPN, the video stream returns over the WAN connection, which I checked by tcpdumping on the remote router.

 

Also, if I deny NVR internet access but let it connect through VPN back to the LAN, I don't get any video through the app, which makes me think NVR only connects through the WAN.

 

Is there a way to connect to NVR from the mobile app using only VPN interface and not the WAN/Internet connection?

 

Thanks,

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:Cannot route NVR through VPN-Solution
2023-10-07 17:24:37 - last edited 2024-09-19 07:43:09

I finally found a fix, but let me explain first what I was trying to achieve in case someone else is looking for the same solution.

 

My goal was to use the Vigi mobile app through VPN ***only***, meaning NOT through TP-Link cloud services. I denied NVR access to the internet, and allowed access to VPN, so that cloud was blocked. By doing this NVR would not connect to the app since it required internet access. I found a way for Vigi App to connect to a LAN address without binding to TPLink cloud.

 

Here are the steps: 

 

1) Unbind NVR from Cloud Account

2) Deny NVR from internet access on the router, and allow through VPN.

3) Open the Vigi App and delete NVR device if you have it configured.

4) On the Vigi app Click + sign to add device > Can't Find QR Code > Add device by IP/Domain (at the bottom)

5) Enter NVR LAN IP address and login credentials (not tplink cloud, just admin/password for NVR).

6) Once added, NVR will show under Local devices

7) Allow NVR to connect to Internet again on the router.

 

If you ALSO want to access NVR through your WAN/Internet connection, you can bind to the TPLINK Cloud Account and Vigi App will show a Cloud NVR and a Local NVR. First one is for WAN access, and second one will only work in the LAN or through VPN.

 

In my case I have better experience accessing NVR through VPN than over Internet/WAN because of some issues with my ISP.

 

I hope this helps someone else looking for an answer!

Recommended Solution
  1  
  1  
#6
Options
7 Reply
Re:Cannot route NVR through VPN
2023-06-09 02:39:31 - last edited 2024-09-19 07:43:09

  @scott1981 

 

Hi, do you set the port forwarding on the NAT device?

Maybe it is blocked somewhere.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:Cannot route NVR through VPN
2023-10-01 22:26:57 - last edited 2024-09-19 07:43:09

  @scott1981 

 

I'm also experiencing same issue...

...but I've found out that if I leave IP settings to Auto (DHCP) seems like it works fine... only when I set a static/manual IP address I can't reach NVR via VPN connection...

 

Also, when static IP is set then NVR cannot check new firmware...

...so I assume it has a connection issue to router if IP is set manually...

 

Regards,

Josip

 

  0  
  0  
#3
Options
Re:Cannot route NVR through VPN
2023-10-07 05:49:06 - last edited 2024-09-19 07:43:09

Hi @Josip_Zagreb 

Thanks for posting in our business forum.

Josip_Zagreb wrote

  @scott1981 

 

I'm also experiencing same issue...

...but I've found out that if I leave IP settings to Auto (DHCP) seems like it works fine... only when I set a static/manual IP address I can't reach NVR via VPN connection...

 

Also, when static IP is set then NVR cannot check new firmware...

...so I assume it has a connection issue to router if IP is set manually...

 

Regards,

Josip

 

That's kind of strange.

So, if you set it to be a static IP address, then I assume you did this from the NVR. After doing this, is this NVR still accessible in your LAN? From your description, it seems to be off the Internet and local network access.

What is your LAN IP and the static IP address you set for the NVR?

 

I'd appreciate it if you can provide a network diagram of your config.

And recommend you try the DHCP reservation on your router set a reserved IP address for the NVR and check again. I think something went wrong with your config which causes this.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Cannot route NVR through VPN
2023-10-07 17:01:26 - last edited 2024-09-19 07:43:09

  @Clive_A 

 

Well... You don't need my network diagram... If I want to have my NVR to connect to Internet (or, in that matter, to be accessible throught VPN) I just have to enable DHCP... If I set a manual IP setting, in a way I just rewrite same settings (ip address, netmask, gw, dns servers) it just can't connect to Internet/VPN... same settings, just switch to manual instead of dhcp...

 

Josip

Clive_A wrote

Hi @Josip_Zagreb 

Thanks for posting in our business forum.

Josip_Zagreb wrote

  @scott1981 

 

I'm also experiencing same issue...

...but I've found out that if I leave IP settings to Auto (DHCP) seems like it works fine... only when I set a static/manual IP address I can't reach NVR via VPN connection...

 

Also, when static IP is set then NVR cannot check new firmware...

...so I assume it has a connection issue to router if IP is set manually...

 

Regards,

Josip

 

That's kind of strange.

So, if you set it to be a static IP address, then I assume you did this from the NVR. After doing this, is this NVR still accessible in your LAN? From your description, it seems to be off the Internet and local network access.

What is your LAN IP and the static IP address you set for the NVR?

 

I'd appreciate it if you can provide a network diagram of your config.

And recommend you try the DHCP reservation on your router set a reserved IP address for the NVR and check again. I think something went wrong with your config which causes this.

 

 

  0  
  0  
#5
Options
Re:Cannot route NVR through VPN-Solution
2023-10-07 17:24:37 - last edited 2024-09-19 07:43:09

I finally found a fix, but let me explain first what I was trying to achieve in case someone else is looking for the same solution.

 

My goal was to use the Vigi mobile app through VPN ***only***, meaning NOT through TP-Link cloud services. I denied NVR access to the internet, and allowed access to VPN, so that cloud was blocked. By doing this NVR would not connect to the app since it required internet access. I found a way for Vigi App to connect to a LAN address without binding to TPLink cloud.

 

Here are the steps: 

 

1) Unbind NVR from Cloud Account

2) Deny NVR from internet access on the router, and allow through VPN.

3) Open the Vigi App and delete NVR device if you have it configured.

4) On the Vigi app Click + sign to add device > Can't Find QR Code > Add device by IP/Domain (at the bottom)

5) Enter NVR LAN IP address and login credentials (not tplink cloud, just admin/password for NVR).

6) Once added, NVR will show under Local devices

7) Allow NVR to connect to Internet again on the router.

 

If you ALSO want to access NVR through your WAN/Internet connection, you can bind to the TPLINK Cloud Account and Vigi App will show a Cloud NVR and a Local NVR. First one is for WAN access, and second one will only work in the LAN or through VPN.

 

In my case I have better experience accessing NVR through VPN than over Internet/WAN because of some issues with my ISP.

 

I hope this helps someone else looking for an answer!

Recommended Solution
  1  
  1  
#6
Options
Re:Cannot route NVR through VPN
2023-10-07 17:30:05 - last edited 2024-09-19 07:43:09

  @Josip_Zagreb 

 

If you do a packet capture you will notice that even when you access your NVR through VPN using Vigi mobile app, traffic is still routed through the internet if the NVR is bound to your tplink account. I proposed a fix below which is purely over VPN, no internet/wan is used.

  1  
  1  
#7
Options
Re:Cannot route NVR through VPN
2023-10-08 01:57:55 - last edited 2024-09-19 07:43:09

Hi @scott1981 

This is right. If you have bound your NVR or camera to the TP-Link ID, then it'll use the cloud primarily. To avoid that, you should keep the NVR or cam in the LAN. So you should not bind it to an ID.

Great findings and understanding of our product. Awesome work! yes

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#8
Options

Information

Helpful: 2

Views: 1618

Replies: 7

Related Articles
NVR cannot work on VLAN and Static IP
341 0
Unable to add NVR remotely
1331 0
Vigi NVR cant be added on Vigi app when NVR is connected to VMS Cloud
249 0
VIGI NVR - Network/cloud backup of recording.
567 0
 NVR VIGI SOFTWARE
281 0
 NVR Streaming Capacity
557 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.