Omada Controller SDN Date Incorrect
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have a problem in System Time in Omada SDN (OC200). I already upgraded it to the latest firmware version. Also, tried to change the Statistic/DashBoard Timezone.
Issue still persists. Can you help me with this?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the issue you are having? Is the clock skewing / running slow or quick? Or can you just not save the changes?
Hardware controller?
- Copy Link
- Report Inappropriate Content
@Philbert I have no internet access because the system date and time is March 28, 2023. I tried to change timezone but still issue persists.
- Copy Link
- Report Inappropriate Content
Hello @jxis,
May I double-check whether your issue is the settings will not save after you changed the Timezone?
If not, could you provide a screenshot to elaborate on the issue?
Does this issue start to happen after the controller firmware upgrades?
- Copy Link
- Report Inappropriate Content
I can save the settings after changing the timezone but the system time still not real-time. Firmware upgrade is also upgraded.
Hope the screenshot will help.
Here:
- Copy Link
- Report Inappropriate Content
@jxis I had the same problem yesterday. My solution: In the right, upper corner you will see "Organization". Switch to "Global View". Then you can click on the left sidebar "Settings" and than "Controller Settings". In my case there was a wrong country-entry. I corrected that and i was able to access internet again.
- Copy Link
- Report Inappropriate Content
@ReneS I already did this bu
jxis wrote
Hi,
I have a problem in System Time in Omada SDN (OC200). I already upgraded it to the latest firmware version. Also, tried to change the Statistic/DashBoard Timezone.
Issue still persists. Can you help me with this?
Thanks
t the issue still persists.
ReneS wrote
@jxis I had the same problem yesterday. My solution: In the right, upper corner you will see "Organization". Switch to "Global View". Then you can click on the left sidebar "Settings" and than "Controller Settings". In my case there was a wrong country-entry. I corrected that and i was able to access internet again.
- Copy Link
- Report Inappropriate Content
Hi @jxis,
Please refer to this article to do some troubleshooting:
OC200 gets wrong System Time and Date via NTP Server
Did you use an NTP Server on the controller?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1105
Replies: 7
Voters 0
No one has voted for it yet.