Hello @Hank21,

 

Thank you for your reply.

 

The following screenshot shows the status of the adopted devices on my network:

 

 

I edited the bandwidth manually and reboot the router but it is still showing the message "Gateway Required" in the WAN configuration as the screenshot below shown.

 

 

What can I do?

 

Thank you in advance for all your support and help.

 

Kindly regards,

 

Juan.

Hi guys. Has anyone come up with a solution for this yet?

For me the ER7206 is adopted and connected and the WAN is connected via PPPOE but on the dashboard is shows that there is no gateway utilization and no internet capacity. When I do a manual speed test it just says failed. DNS is defined by the ISP and I even tried the public Google one and still not able to perform a speed test. Devices connected the the network can browse with no issues whatsoever. Some screenshots below. Using the OC200 controller.

 

  @bruskieZA 

 

This is not normal.

Have you tried to forget ER7206 within controller, reboot controller, and re-adopt ER7206?

Forgetting ER7206 means it will go to a factory reset mode so that you can start from scratch with it...

 

PS: Ypu can also try brand-new BETA software for your OC200:

https://community.tp-link.com/en/business/forum/topic/605278

  @Hoamboy 

Strangest thing. I trolled the internet and someone suggested adding the ISP widget to the dashboard. And boom! I could manually add the line speed and the gateway usage showed. Very weird but it worked. 
I still can't run a manual speed test though. Runs for a few seconds then just fails without proper error description. That's one to solve for another day. 

  @bruskieZA 

 

This is indeed weird.

Nevertheless I would go for latest (also BETA) software on both your ER7206 and Controller.

1.3.0 for ER7206

BETA https://community.tp-link.com/en/business/forum/topic/605278 for Controllers

And then see if that helps to resolve your issues.

  @Hoamboy 

I will give the beta for the OC200 a try. The gateway is already on the latest version.

Speed test works for me, but the "Gateway required" is also shown at my ER605. Have found this, because the same entry "Gateway required" is shown at the VPN Users - and the users really don´t have a gateway when connected.