Too many preconfigured devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Too many preconfigured devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When adopting my
| ER605(UN) v1.6 |
and
| TL-SG2210P(UN) v3.26 |
I am rcv. this msg.
"Too many preconfigured devices....'
What is a work around for this?
Thanks,
Chris.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Nuxmedia
Nuxmedia wrote
@Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.
This controller haven't any AP adopted before
It seems that you don't have available licenses to add the device. For management and configurations on the Omada Cloud-Based Controller, each device should be bound with an activated license. You can login the Omada Cloud website with your TP-Link ID account, and purchase licenses for your Omada devices.
- Copy Link
- Report Inappropriate Content
Hello @Everyone, I encountered the same error, only fix is to add your newly purchased license to your controller in https://omada.tplinkcloud.com/#licenseManagement. You can adopt the EAP without issue once you add the license.
- Copy Link
- Report Inappropriate Content
Dear @SysopChris,
Are you using software controller or hardware controller OC200/OC300, what's the version of your controller?
How many Omada devices are adopted by the controller before you adopt the two devices?
If possible, could you please upload a image of the error "Too many preconfigured devices....'?
- Copy Link
- Report Inappropriate Content
@Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.
This controller haven't any AP adopted before
- Copy Link
- Report Inappropriate Content
Hello @Nuxmedia
Nuxmedia wrote
@Fae To add EAP225 to Omada cloud controller error "Too many PRECONFIGURED devices in this account. Available licenses are not enough." is obtained.
This controller haven't any AP adopted before
It seems that you don't have available licenses to add the device. For management and configurations on the Omada Cloud-Based Controller, each device should be bound with an activated license. You can login the Omada Cloud website with your TP-Link ID account, and purchase licenses for your Omada devices.
- Copy Link
- Report Inappropriate Content
@Fae No EAP's are configurated in Omada Controller. I'm trying to adopt the only one
- Copy Link
- Report Inappropriate Content
Too many PRECONFIGURED devices in this account. Available licenses are not enough. please help cloud omada
Thank You!
- Copy Link
- Report Inappropriate Content
Hello,
I am tryiong top configure the EAP 610 outdoor as a main AP (connected to my rooter) and the EAP225 outdoor as a mesh (wireless) but I cannot have them connected and working.
When I try to add the EAP 610 clicking on add devices on the omada website typing manually the S/N, the following message appears:
Could you please provide some help?
Thanks a lot.
- Copy Link
- Report Inappropriate Content
have you checked the prerequisites for the cloud based omada? https://www.tp-link.com/en/support/faq/3365/
do you have avail licenses?
- Copy Link
- Report Inappropriate Content
@RVCD I had similar issue. all you need to do first is check if you have assign your licence to the controller which you created ( am assuming a cloud controller). Then after try to add the device to the controller.
Note: you might have bought the licence but you have not assign it to controller.
- Copy Link
- Report Inappropriate Content
Hello @Everyone, I encountered the same error, only fix is to add your newly purchased license to your controller in https://omada.tplinkcloud.com/#licenseManagement. You can adopt the EAP without issue once you add the license.
- Copy Link
- Report Inappropriate Content
@Fae It seems we are crazy! We are still using their products after such negligence, I boycott you from today. How many companies are there who don't have to pay a license fee to run the device. And we license agree for license fee, Even if you want to pay, you have to face such problems.😡😡😡😡😡
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 12877
Replies: 15
Voters 0
No one has voted for it yet.