Pharos - find IP address on network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Is there an easy way to find the IP address of my Pharos device on the network please? My router doesn't seem to list it alongside any of the other devices with their IP addresses.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Did you change the CPE IP before? From my experience the CPE always use a static IP, that means it may not on the same subnet as your router so the router cannot detect it.
Basically there is no easy way to find the CPE IP if it is static IP. You can try the default IP 192.168.0.254, or just reset the CPE
- Copy Link
- Report Inappropriate Content
Did you change the CPE IP before? From my experience the CPE always use a static IP, that means it may not on the same subnet as your router so the router cannot detect it.
Basically there is no easy way to find the CPE IP if it is static IP. You can try the default IP 192.168.0.254, or just reset the CPE
- Copy Link
- Report Inappropriate Content
Somnus wrote
Did you change the CPE IP before? From my experience the CPE always use a static IP, that means it may not on the same subnet as your router so the router cannot detect it.
Basically there is no easy way to find the CPE IP if it is static IP. You can try the default IP 192.168.0.254, or just reset the CPE
Thank you very much for your reply. Your comment about not being on the same subnet would explain a lot so thank you very much for this.
I am afraid I cannot remember the setup process as it was quite a while ago. I do not recall whether the IP was changed at this time, hence my assumption it was running on a dynamic IP assigned by the router.
Thank you for your helpful advice. It seems I am best to reset it as you suggested.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 625
Replies: 2
Voters 0
No one has voted for it yet.