This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi, just bought tp link SG2210P and a couple of EAP110 v4, According to the manual included in the SG2210P, EAP 110 is compatibe with the said Switch. But i cannot power up the EAP110 thru POE switch.
@Od3 Wait for confirmation from TPlink directly or others that know for sure but...
If I am reading the specs correctly for each device, the EAP110 is Passive POE only and therefore cannot be powered by the TL-SG2210P Active POE. You would need to power the EAP110 with the provided POE injector and then connect from the Data Port of the EAP110 to the TL-SG2210P.
If you are needing to power the AP with the TL-SG2210P, the EAP225-Outdoor would be the next obvious choice. The EAP225 is 802.3af PoE and 24 Passive PoE and would work with the TL-SG2210P directly. If you are able to, return any of the EAP110s that are being installed in a location that require power from the TL-SG2210P and replace them with EAP225s.
Also I think the EAP110 Port is 10/100 while the EAP225 is Gigabit. May or may not be an important spec to you but when I built my RV Parks Wi-Fi, the POE and Data Spec were the reaons I chose the EAP225 over the EAP110.
Helpful: 0
Views: 567
Replies: 1
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
