DHCP lookup failed when VLAN ID is assigned to wireless network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP lookup failed when VLAN ID is assigned to wireless network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP lookup failed when VLAN ID is assigned to wireless network
DHCP lookup failed when VLAN ID is assigned to wireless network
2022-10-20 10:42:31
Model: OC200  
Hardware Version:
Firmware Version:

Hi,

I have created an additional network in the OC200 (Reception : 192.168.30.1/24 on VLAN ID 30). The associated wireless networks will not provide DHCP when the network VLAN is set - clients cannot even connect to this network.

If I remove the VLAN ID from the wireless network, it defaults back to the primary LAN, and I get IP addresses from 192.168.0.x range and clients can connect.

I've watched countless videos and trawled through the manual and nothing seems to specify anything relating to this issue.

Please help!

  0      
  0      
#1
Options
3 Reply
Re:DHCP lookup failed when VLAN ID is assigned to wireless network
2022-10-20 12:18:07

  @richardclarke79 

 

Which model switch and AP are you using?

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:DHCP lookup failed when VLAN ID is assigned to wireless network
2022-10-21 07:12:05

  @KimcheeGUN 

SW - TL-SG2008P v1.0 || firmware - 1.0.0 Build 20200608 Ref 76470
AP - EAP610(EU) v2.0 || firmware - 1.0.2 Build 20220120 Ref 53691

 

all running through the ER605 v2.09, managed via the OC200

  0  
  0  
#3
Options
Re:DHCP lookup failed when VLAN ID is assigned to wireless network
2022-10-21 07:35:13

  @richardclarke79 

 

The port between the switch and the EAP needs to be set to Tagged, also the EAP610 cannot set a PVID on the port, it can only be in a VLAN.

Just striving to develop myself while helping others.
  0  
  0  
#4
Options