Omada OC200 > Wired Networks > LAN Also Gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada OC200 > Wired Networks > LAN Also Gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RickJamesBish

2022-10-06 10:53:35 - last edited 2022-10-06 11:53:36

Posts: 353

Helpful: 147

Solutions: 13

Stories: 1

Registered: 2022-09-24

Omada OC200 > Wired Networks > LAN Also Gateway

2022-10-06 10:53:35 - last edited 2022-10-06 11:53:36

Model: OC200

Hardware Version:

Firmware Version: V5.5.7

I am a bit confused on the LAN setting in the OC200 Hardware Controller.

I plugged the OC200 into one of the modem / routers ports.

It adopted without issue.

All APs are adopted and connected.

Internet is working.

What exactly is the LAN setting referring to in the Omada Controller?

It shows 192.168.0.1/24. Did it auto-detect my modem because that is the LAN address of the modem or is that a setting I should change so it is different than the modems IP?

The OC200 is obviously getting assigned an IP from the Modem so I am unclear what this setting is and if I need to address it.

When I edit that entry in LAN it has a yellow prompt next to interface that says (Gateway Required).

1 Reply

Virgo

LV5

2022-10-18 12:11:36

Posts: 2588

Helpful: 348

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:Omada OC200 > Wired Networks > LAN Also Gateway

2022-10-18 12:11:36

@RickJamesBish

If you don't have a Omada Gateway, you don't need to care about that.

Like the prompt saying: Gateway Required, you need to use or change it if you have a Omada router managed by OC200.

Just striving to develop myself while helping others.

Omada OC200 > Wired Networks > LAN Also Gateway

Omada OC200 > Wired Networks > LAN Also Gateway

Information

Voters 0

Tags