Home

Forums

Stories

Knowledge Base

Business Community > Accessories > PoE LED not lit

< Accessories

PoE LED not lit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PoE LED not lit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PoE LED not lit

MrChuckles

2022-07-28 16:01:33 - last edited 2023-08-22 12:32:43

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-06-19

PoE LED not lit

2022-07-28 16:01:33 - last edited 2023-08-22 12:32:43

Model: TL-POE170S

Hardware Version:

Firmware Version:

I have a Gigabit PoE++ model TL-POE170S. The LED for the PoE output port is not lit. I'm trying to power and connect to an outdoor access point EAP225-Outdoor. I tried switching to a second PoE injector that I know works, but the LED on the working injector also goes off once connected.

What could be causing the LED to turn off?

3 Reply

Virgo

LV5

2022-08-02 12:41:48 - last edited 2023-08-22 12:30:56

Posts: 2588

Helpful: 348

Solutions: 191

Stories: 0

Registered: 2021-05-10

Re:PoE LED not lit

2022-08-02 12:41:48 - last edited 2023-08-22 12:30:56

@MrChuckles

TL-POE170S and EAP225-Outdoor both support 802.3af/at and are compatible, so normally there is no problem, try different cables to test.

Just striving to develop myself while helping others.

EAP2020

LV1

2022-08-14 19:16:55 - last edited 2023-08-22 12:30:56

Posts: 5

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2020-02-17

Re:PoE LED not lit

2022-08-14 19:16:55 - last edited 2023-08-22 12:30:56

@MrChuckles

I had a similar issue with an EAP225 Outdoor and the supplied PoE injector: the injector works with other EAPs, the LED is lit. Connecting the EAP225 Outdoor extinguished the LED on the injector (comes back after unplugging the EAP). No indicator LEDs came on in the EAP225 Outdoor. I ended up returning the EAP for a refund.

Hank21

2022-08-15 08:02:18 - last edited 2023-08-22 12:30:56

Posts: 3673

Helpful: 718

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:PoE LED not lit

2022-08-15 08:02:18 - last edited 2023-08-22 12:30:56

Dear @MrChuckles , @Virgo, @EAP2020,

MrChuckles wrote

I have a Gigabit PoE++ model TL-POE170S. The LED for the PoE output port is not lit. I'm trying to power and connect to an outdoor access point EAP225-Outdoor. I tried switching to a second PoE injector that I know works, but the LED on the working injector also goes off once connected.

Thanks for taking the time to report the issue to our community!

TL-POE170S is incompatible with EAP225-Outdoor. To power up this EAP, TL-POE160S is recommended to use.

You can see these information on the offical website about Overview of TL-POE170S.

https://www.tp-link.com/business-networking/accessory/tl-poe170s/#overview

Best Regards!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

PoE LED not lit

PoE LED not lit

Information

Voters 0

Tags