Business Community > Switches > TL-SG3428 V2 ACL don’t work with official FW
< Switches

TL-SG3428 V2 ACL don’t work with official FW

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG3428 V2 ACL don’t work with official FW

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG3428 V2 ACL don’t work with official FW
TL-SG3428 V2 ACL don’t work with official FW
2022-06-28 23:43:42 - last edited 2022-09-01 02:43:34
Tags: #VLAN & Multi-Networks #ACL
Model: TL-SG3428  
Hardware Version: V2
Firmware Version: TL-SG3428(UN)_V2_20210409

Hello, 

i have spend more than 8 hour to figure out that the ACL with different VLAN and Networks don't works.

 

I have found this BETA Firmware from 2021
TL-SG3428_v2_2.0.3_Build 20210825(Beta)

with this firmware the ACL works.

 

My Question is when would you release a new Firmware for this switch?

 

For new users this is not acceptable to download a non working official firmware.

 

Please update the official fw which works also with omada 

 

thanks

OC200 V1 ER605 v2.0 TL-SG2210P v5.20 EAP245(EU) v4.0 (1x) EAP653(EU) v1.0 (2x) Fritz!Box 7490 (DSL 100 / DS Lite tunnel) TL-SG3428 v2.0 (Standalone Mode + FB) TL-SG105E v5 (Standalone Mode + FB)
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-SG3428 V2 ACL don’t work with official FW-Solution
2022-09-01 02:43:29 - last edited 2022-09-01 02:43:34

Hi there,

 

The new firmware TL-SG3428(UN)_V2_2.0.7 Build 20220606 released recently has fixed the ACL-related issue.

 

If you find that Combined ACL failed to block traffic between Layer 3 networks, please check for a firmware update first.

 

Thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
4 Reply
Re:TL-SG3428 V2 ACL don’t work with official FW
2022-06-29 02:32:58

Dear @nurix,

 

nurix wrote

Hello, 

i have spend more than 8 hour to figure out that the ACL with different VLAN and Networks don't works.

 

I have found this BETA Firmware from 2021

TL-SG3428_v2_2.0.3_Build 20210825(Beta)

with this firmware the ACL works.

 

My Question is when would you release a new Firmware for this switch?

 

For new users this is not acceptable to download a non working official firmware.

 

Please update the official fw which works also with omada 

 

Sorry for any trouble caused! I haven't been informed of the ETA of the new firmware for this switch yet, will try to push the R&D team to release the firmware shortly. If you need any further assistance with the TP-Link products, please feel free to start a thread on the community or submit a ticket email to our technical support team from here.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#2
Options
Re:TL-SG3428 V2 ACL don’t work with official FW-Solution
2022-09-01 02:43:29 - last edited 2022-09-01 02:43:34

Hi there,

 

The new firmware TL-SG3428(UN)_V2_2.0.7 Build 20220606 released recently has fixed the ACL-related issue.

 

If you find that Combined ACL failed to block traffic between Layer 3 networks, please check for a firmware update first.

 

Thank you for your attention!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#3
Options
Re:TL-SG3428 V2 ACL don’t work with official FW
2022-11-01 17:48:50

  @Fae 

Hello,

 

Thank you for Support.

 

Because i almost looking for new Firmware updates only on the Product Support site

 

https://www.tp-link.com/de/support/download/tl-sg3428/#Firmware

https://www.tp-link.com/en/support/download/tl-sg3428/v2/#Firmware

 

I can't see the new Firmware file on the Product Support site.

Or is there any other place where i can look for Firmware?

 

For example i have bought for few day a TL-SG105E with the

FW 1.0.0 Build 20211209 Rel. 52640 which i don't find on the Support page because i want to have the file for backup.

Now a have updated with the FW 1.0.0 Build 20220930 Rel.36078.

 

Please don't get me wrong, just how are new customers supposed to find out about this new firmware?

Not everyone registers in the forum and actively searches for solutions.

I don't want to know how many firmware's here in the forum would have solved many customer problems if they knew they existed?

The result is not good for you if the customers send the hardware back after testing.

 

Many greetings

OC200 V1 ER605 v2.0 TL-SG2210P v5.20 EAP245(EU) v4.0 (1x) EAP653(EU) v1.0 (2x) Fritz!Box 7490 (DSL 100 / DS Lite tunnel) TL-SG3428 v2.0 (Standalone Mode + FB) TL-SG105E v5 (Standalone Mode + FB)
  0  
  0  
#4
Options
Re:TL-SG3428 V2 ACL don’t work with official FW
2022-11-06 20:37:50

  @Fae 

 

Hello,

 

i would inform you of following difference between the FW i have notice

 

With the FW TL-SG3428v2_UN_2.0.3_20210825(Beta) the ACL works with S/D-IP 0.0.0.0

 

 

With the FW TL-SG3428(UN)_v2_2.0.7_20220606 the ACL works without IP Range

 

I have seen in the Manual this

 

 

--> This means when i have a ACL rule list like above, i have to put a rule which permit all other traffic otherwise it will be implicit denied.

 

 

 

 

OC200 V1 ER605 v2.0 TL-SG2210P v5.20 EAP245(EU) v4.0 (1x) EAP653(EU) v1.0 (2x) Fritz!Box 7490 (DSL 100 / DS Lite tunnel) TL-SG3428 v2.0 (Standalone Mode + FB) TL-SG105E v5 (Standalone Mode + FB)
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1045

Replies: 4

Tags

VLAN & Multi-Networks ACL
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.