Dear @lukass2000 ,

lukass2000 wrote

I created an individual time range under PROFILES / TIME RANGE.

The Personalcomputer (connected with a Lan-Cable) and the Smartphone (connected over WiFi) of my son should use this time range.

How can I assign this time range to different devices?

The time range function is usually used in conjunction with the schedule setting function.

May I know your application scenarios and network requirements?

Best Regards!

Dear @lukass2000，

lukass2000 wrote

certain devices should only be allowed to access the internet at certain times.

A group would be ideal to which you can assign these devices and then restrict the group accordingly.
However, an assignment should be possible for certain devices regardless of whether the device is in the LAN or in the WLAN.

An example :)

Alle Computer, Smartphones und Tablets should can use Internet.
Only Computer in the reception should not have internet between 11 p.m. and 6 a.m.

There should be no internet on the terrace between 9 p.m. and 8 a.m.

Have seen the Time Range function, but this works only fpr any WiFi SSID, so not for devices which are connectet with LAN-Cable :(

Do you have a gateway like R605/R7206, in standalone mode it can support to set the ACL and set the effective time like below.

But on the controller, it can't support so far.

Best Regards!

Dear @lukass2000,

lukass2000 wrote

Are there any prospects that this possibility also works via Omada SDN?

I'm afraid that it can not set on the controller at present.

This feedback has already been forwarded to the TP-Link team for evaluation.

Best Regards!