Beta Software Omada Controller_v5.1.6_Windows For Trial (Beta Edition) - [Closed on 23 May 2022]
Updated on 23 May 2022:
So far, Omada Controller v5.1 has been officially released,
Check this thread for details if you haven't noticed this update yet.
Most of Omada EAP devices have released official firmware to support PPSK function.
Please check for updates via cloud or via the TP-Link Official Website manually.
Thank you so much for your valuable feedback as always!
------------------------------------------------------------------------
Updated on 28 February:
Add the beta firmware of EAP245 v3 and EAP620HD v1 which are adapted to Omada Controller v5.1.
Kind Note:
Omada Controller v5.1.7 Windows has been released on 25 February. If you would like to test more with the EAP beta firmware, please install the Controller v5.1.7 (Windows) instead.
There is no other Controller version for test yet, this post will be actively updated if more test firmware is available.
We appreciate your attention on this topic, welcome to comment below with your real feedback on this trial.
Any other feedback about the Omada SDN solution, welcome to start a new thread from Here.
Many thanks for your great cooperation and understanding!
------------------------------------------------------------------------
Hello Everyone,
We are excited to announce that we now have the Beta firmware of Omada Controller v5.1.6 (Windows) for trial!
The Purpose Of The Beta Firmware
We hope to offer you with a chance to experience the new features added in the Controller v5.1 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release.
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
The Main Features To Tests
1. Heatmap
Go to Map -> Map, import your map, edit your map scale, place EAPs, then simulate.
2. Private Pre-Shared Key (PPSK) - it requires upgrading the EAP to the adapted firmware.
For “PPSK without RADIUS”, you can create PPSK profiles (Settings -- Profiles -- PPSK).
3. the Report page
Try to view, export and email network reports.
4. Facebook Wi-Fi 2.0 - it requires upgrading the EAP to the adapted firmware.
Go to Settings -> Authentication -> Portal to configure the Facebook Wi-Fi 2.0.
5. Upgrade Schedule
Go to Settings -> Services to configure the Upgrade Schedule.
6. IPTV - it requires upgrading your ER605/ER7206 to version 1.2.0.
Go to Settings –> Services -> IPTV to configure it.
7. Connect FTP/TFTP/SFTP/SCP file servers for backup and restore
Go to Settings –> Maintenance –> Backup & Restore
For more detailed Release Note, please check the attached documentation at the end.
Download Link For Beta
Omada_SDN_Controller_5.1.6_Windows (Beta)
Kind Note:
Omada Controller v5.1.7 Windows has been officially released on 25 February.
Check this thread for details if you haven't noticed this update yet.
There is no other Controller version for test yet, this post will be actively updated if more test firmware is available.
Omada EAP:
EAP620HD V1_1.1.0 Beta Firmware (Fully Adapted to Omada Controller v5.5)
EAP660HD(EU)_v1_1.1.1_Build 20220209 (Beta)
EAP660HD(US)_v1_1.1.1_Build 20220209 (Beta)
EAP225(EU)_v3_5.0.8_Build 20220209 (Beta)
EAP225(US)_v3_5.0.8_Build 20220209 (Beta)
EAP245(EU)_v3_5.0.5_Build 20220224 (Beta)
EAP245(US)_v3_5.0.5_Build 20220224 (Beta)
EAP225-Outdoor(EU)_v1_5.0.8_Build 20220209 (Beta)
EAP225-Outdoor(US)_v1_5.0.8_Build 20220209 (Beta)
Most of Omada EAP devices have released official firmware to support PPSK function.
Please check for updates via cloud or via the TP-Link Official Website manually.
Omada Gateway (official version):
ER605(UN)_V1_1.2.0 Build 20220114 Release Note >
ER7206(UN)_V1_1.2.0 Build 20220117 Release Note >
Kind Notes:
1. Cloud Access is unavailable for the Beta Controller 5.1.6.
2. We strongly suggest you save the backup file before upgrading.
3. To revert to the previous Controller version from this Beta firmware, you must completely uninstall it.
Feedback:
Any further feedback on the new firmware, please feel free to comment below.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
-- Omada Controller version (previous and current)
-- Device Model(s) and Hardware
-- Device Firmware (previous and current)
Note: if you decide to downgrade the firmware before sending feedback to us, we recommend you save a copy of the current Log file* and Backup Config file** before you do that, which might be helpful to address the issue you suffered from the new firmware.
* The Log file of Controller can be exported under Settings -> Services -> Export Data -> Running Log.
** The Backup Config file of Controller can be exported under Settings -> Maintenance via local access.
Thank you in advance for your great cooperation and support!
We look forward to hearing from your real and valued feedback here!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 9385
Replies: 32