TL-R605 Adoption Fails
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Similar to what others have seen, adoption has been failing for me. In order to configure the device for my network I've painstakingly gone in and changed the IP range, assigned the router an IP and disabled the DHCP server.
Somewhere in the adoption process the router resets itself to the 192.168.0.0/24 network and reactivates its DHCP server. Which of course creates havoc with the existing clients.
Then the adoption fails.
I have, briefly, seen the 192.168.0.1 IP show up in the Omada options for the device, however even if I issue an update from the Omada controller, it still seems to either not take, or it simply is reverting.
The 1.0 firmware is definitely not ready for use. When can we expect an update to fix these issues?
Hey
I had the exact same problem, turned out it was a setting on the Controller that was pushing out incorrectly (my fault)
Under SETTINGS > WIRED NETWORKS there is a LAN pre-set for 192.168.0.0/24 my other existing device where on 10.x/24 addresses
Noticed it kept applying the 0.x/24 range same as you are seeing and couldnt work it out, once i changed this LAN setting to the correct range it worked first time.
It appears to pull its range from this setting during adoption
Hope that helps!
