How do i know if its my internet or my AP giving me a bad connection.
Apologies i am not up to speed with this all; so i have probably got the names of things wrong.
I bought 3 x EAP225's and hard wired them to a 8 way switch (4 x poe) and bought a OC200 as well. I disabled the wifi on my sky router and set everything up the best i could and to my suprise it all worked lovely!!
I have just upgraded my internet still through sky, so now i have faster internet and more devices hardwired than before; but my wifi is awful now. Almost unuseable! Everytime i run a speedtest its really good (for where i live) but using any device on wifi is like swimming in syrup lol
Any help would be greatly appreciated.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Bertie78,
I have just upgraded my internet still through sky, so now i have faster internet and more devices hardwired than before; but my wifi is awful now. Almost unuseable! Everytime i run a speedtest its really good (for where i live) but using any device on wifi is like swimming in syrup lol
What's the current firmware version of your EAPs? What's the firmware version of the OC200?
Did you configure any advanced settings such as fast roaming, mesh, airtime fairness or band steering on the OC200?
If the EAPs have been running for a long time, you could try to reboot or factory reset them and check if it helps.
- Copy Link
- Report Inappropriate Content
Running a speed test over Wi-Fi is never good anyway - check your internet speed with a wired connection, if the results are within the range of your sold speed, then you need to look at your EAPsConfiguration.
What devices are you testing with, 2.4Ghz or 5Ghz frequencies?
If you are testing from a mobile or tablet device what is it's advertised Wi-Fi connection capable of?
What speed does it show from your device connected back to the router, if the signal is low, your speed will be affected, as it will if your APs are too close - Try with only one connected to avoid overlaps, how does it perform now?
- Copy Link
- Report Inappropriate Content
@Fae i have tried rebooting them today. Firmware is up to date on all.
All my hard wired products work fine.. its just the wifi, which was great until they changed my sky router
- Copy Link
- Report Inappropriate Content
Most of my wifi devices are 5ghz
The system was all great even set up by a tech phobish guy like me lol.
- Copy Link
- Report Inappropriate Content
Can you be a little more detailed in the actual issue, you said speed tests are ok but using Wi-Fi is not.
Are your APs too close together, what connection speed do your devices show when connected? Are they all on the same VLAN?
Try only using 1 AP, how are things with only one - do test close by, within a couple of meters, if all works well, add the second one, try again.
APs being too close together can also cause issues with overlap.
Wehre is it you see the issues though, via the internet, such as YouTube or via internal transfers, can you give some exmples?
- Copy Link
- Report Inappropriate Content
Sorry it must be frustrating and thank you for taking the time to help.
I assume the aps are fine in terms of install location, as i said my wifi was good before and nothing has changed accept a new router.
The wifi signal is excellent everywhere and the speed when tested via my phone is as advertised by my provider. Slightly faster when i test from my computer.
The oddest and most annoying thing is my wifes phone can not even use the wifi for more than a few minutes before it freezes.
My phone freezes a couple of times a day.
But none of the hard wired devices struggle at all.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1298
Replies: 7
Voters 0
No one has voted for it yet.