This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
After power loss SG2210P lost its IP address and I can't find it. Ping to 192.168.0.1 times out. Anybody has suggestion how to find switch on the network? Or reset to defaults? Switch itself seems to be working fine, just lost configuration.
Thanks
@Vytenis, press the RESET button for 5-7 seconds until the LEDs signal loading factory settings.
Then connect a laptop/PC to the switch, don't connect the switch to the network. Set the laptop to static IP 192.168.0.10 and try again to reach the switch at 192.168.0.1. Change the IP of the switch to an unused static IP from your network, apply the changes and remember to save them to prevent further loss of the IP at next reboot or power outage.
Of course, to be able to save the changes after you did apply the new IP you need to set back your laptop's IP address to one from your network IP range, log into the switch again and save settings (all this without powering off the switch between those steps).
Helpful: 0
Views: 848
Replies: 1
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
