Business Community > Routers > WAN connected to LAN and WAN interfaces
< Routers

WAN connected to LAN and WAN interfaces

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WAN connected to LAN and WAN interfaces

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WAN connected to LAN and WAN interfaces
WAN connected to LAN and WAN interfaces
2019-10-22 08:05:55 - last edited 2021-04-19 11:47:06
Model: TL-ER5120  
Hardware Version: V7
Firmware Version: V4_20180706

I have a number of broadband connections I wish to connect on the WAN interfaces on the TL-ER5120. However they are in another building and as such they are plugged into my switch on one cable and therefore are currently plugged into the LAN. Can I take a cable from the switch and plug into the WAN on the TL-ER5120 and configure the WAN ports to see these broadband lines, in effect they would be plugged into the LAN and WAN on the TL-ER5120, hopefully this makes some sense. I have done a diagram to help explain.

 


Thanks.

Dave

  0      
 
  0      
 
#1
Options
3 Reply
Re:WAN connected to LAN and WAN interfaces
2019-10-23 02:46:02 - last edited 2021-04-19 11:47:06

@BigD 

 

You can take a cable from the switch and plug into the WAN on the TL-ER5120, but why you still want to take a cable from the switch and plug into the LAN on the ER5120? 

I think you can remove the cable between the LAN and the switch. Then the clients in the LAN of ER5120 still can access the internet.

  0  
  0  
#2
Options
Re:WAN connected to LAN and WAN interfaces
2019-10-23 07:13:27 - last edited 2021-04-19 11:47:06

@Andone 

 

Thanks, not sure if i have explained it very well. I have both clients and broadband connections on a single cable from another building that plugs into my switch. I want to have these broadband connections managed by the ER5120 so imagine i need to plug them into a WAN port on the ER5120, so would need a cable for each broadband connection plugged from switch into a WAN port on the ER5120.

  0  
  0  
#3
Options
Re:WAN connected to LAN and WAN interfaces
2019-10-29 01:52:42 - last edited 2021-04-19 11:47:06
I got your meaning. You client and broadband is from the same cable connected to the switch. I think it cannot meet your demand. Still need to isolate the clients and broadband.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 883

Replies: 3

Related Articles
HTTPd "local" admin server is binding to both LAN and WAN interfaces
824 0
Traffic From Wan\LAN to LAN
745 0
Backup Wan Don't Work
1443 0
Route evenly to all WAN Ports
1593 0
ER7206 change WAN/LAN port to a WAN port
286 0
Same VLAN ID for mutiple WAN (Internet) Interfaces
769 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.