I have 2 EAP225 outdoor units ran by the Omada Controller software.

Both using the POE injector included with the units.

Both Connected fine and use the same , identical SSID's and passwords,, settings and configurations.

the issue is that AP #1 is working just fine without issue.

Unit AP#2, receiving 782mbs of information, is shown to only be sending out about 7mbs wirelessly on the 2.4g net side, and 14mbs of 5g.

I've rebooted that specific unit to see if it needed to restore fresh settings but got nothing.

I'm curious to see if 'forgetting' the unit and re adopting it would or could help.

ANY help would be appreciated.