Doma wrote

Hi All,

apologies if the question has een asked before:

 

Where I can dowload the latest firmware for T2600-18TS?

I have 2 of them and would like to upgrade to the latest firmware.

 

Installed version: 1.0.0 Build 20170105 Rel.55239(s)

 

From support page the available one looks even older than the one shipping with the switch? How is that possible?

https://www.tp-link.com/uk/support/download/t2600g-18ts/v1/#Firmware

 

Can anyone please help?

 

Thanks

Hi Doma

T2600G-18TS V1 only has one firmware. It's the firmware which you are using. If you meet any problem of this firmware, you can contact TP-Link support for help.

And T2600G-18TS V1 also can upgrade the V2 firmware. But you need to re-configure the switch and cannot downgrade to V1 after upgrade the V2 firmware.

https://www.tp-link.com/en/support/download/t2600g-18ts/v2/#Firmware

Hi @Anderson,

many thanks for your reply.

Just to clarify: Even if I have a V1 Hardware I can apply a V2 firmware?

From the link provided I cannot find the V2 firmware. It's ok to reconfigure the switch.

Also is there a list of what's included in V2? 

Thanks a lot for your help.

Kind Regards,

Doma

Doma wrote

Hi @Anderson,

many thanks for your reply.

 

Just to clarify: Even if I have a V1 Hardware I can apply a V2 firmware?

 

From the link provided I cannot find the V2 firmware. It's ok to reconfigure the switch.

Also is there a list of what's included in V2? 

 

Thanks a lot for your help.

 

Kind Regards,

Doma

Hi Doma

The download link of V2 firmware. https://static.tp-link.com/2018/201808/20180801/T2600G-18TS(UN)_V2_180710.zip

V1 hardware can use V2 firmware.

About the function of V2, you can refer to the datasheet of V2.

R1D2 wrote

Hello Anderson, I have the same question for T1600G-28TS V1: can I use the new web UI of firmware V2 for the V1 switch, too?

 

And where can I find this V2 firmware? It's not listed on the german support site: https://www.tp-link.com/de/support/download/t1600g-28ts/v2/

 

I have several switches in the office, which have different web UIs (T1600G-28TS, T1500G-10PS, T1500G-8T etc.). I would like to have the same web UI on all switches if possible. My T1500G switches V1 have been already upgraded to V2 firmware versions, only T1600G left.

Hi R1D2

T1600G-28TS V1 can use the V2 firmware. But T1600G-28TS V2 doesn't use the new web UI. 

T1600G-28TS V3 uses the new web UI but V1/V2 cannot upgrade the V3 firmware.

T1600G-28TS V2 only has one firmware version so we did not put the firmware link on the official website. If you need the V2 firmware, you can contact TP-Link Support for help.

Hi All,

I've just bought two T2600G-18TS but both are unfortunately version 1 instead of version 2.

The reason I want to upgrade is that I hope the ssh and ssl feature support will be up to date (ssh - +diffie-hellman-group1-sha1 +ssh-dss, ssl - supported ciphersuites and version are weak and outdated). But i do not seem to find the actual difference between version1 and version 2 (and this for the firmware version and the hardware version).

Is there a web page that compares both, as reading the datasheets does not really show any difference.

Regards,

Dirk

Hi damd

V2 change the web UI. You can see the CG of V1 and the emulator of V2.

https://static.tp-link.com/1910012207_T2600G_CG.pdf

https://emulator.tp-link.com/T2600G-28TS_2.0/index.html

And the latest firmware of V2 support TLS 1.2 now. You can see their released note.

https://www.tp-link.com/en/support/download/t2600g-18ts/v2/#Firmware