ADDO wrote

I know RTFM..but I seem to be having some issues getting it to work....I have a T1600G-28PS..What I want to set up is 2 vlans (with switch ports used for POE cameras and a uplink to go to another POE switch) The other vlan I want to use for the non POE computers or streaming devices....I want to seperate the 2 since I don't want streaming...etc to get in the say of the cameras....not sure if I will need that or not)...but I will use as a router a Assus AC1300 which I would like to use as a DHCP server...I know this should be fairly but I must be doing something wrong.

 

Any help would be appreciated 

Hi ADDO:
    

     You need configure two VLAN and change the PVID for different ports. In my opinion, maybe there are some wrong with your configuration.

     1. forget change the PVID, if you have VLAN2 and VLAN3, you need change the PVID for corresponding port to 2 or 3.

     2. configure the error attribute for uplink port, uplink port should belong to two differnet vlan, and tagged.

    I suggest you read FAQ firstly,https://www.tp-link.com/en/faq-2149.html