Team, I have a customer who needs up to 6 routers on a (DC-)site. Each of these routers will have their own public IP (wan) and their own subnet (lan) This is for redundancy and performance reasons. H

Team, I have a device connected to a ER7206 router. And according to the log on the controller, it is disconnecting every 5 minutes. The device then reconnects a few minutes later. This behavior is no

Team, I have a customer with 5 public IP addresses; all within the same subnet (i.e. /29 - 255.255.255.248). Lets assume these adresses are 90.70.50.202-206. I would to use 3 of these on a ER605 witho

Team, See attached image: The status of the WAN-interface states its offline. While it looks everything is working as expected. I tried rebooting and activating online detection interval - no improvem

Team, I'm considering replacing the existing router models ER605 and ER7206 with the ER707-M2 and have 2 questions: (1) - is the ER707-M2 able to route at 1-Gbps wirespeed with all DPI and IDS/IPS cap

Finally, and a huge thank you to TP-Link Team... This is a huge step in the right direction! DPI is almost a standard now, TP-Link Team bringing the heat again!! Looks so good in the dashboard!!