PeekaChuU wrote ....using wifi 6 on small channel widths would never get me the speed im looking for The 'center' of the channel has (almost) nothing to do with the width of the channel (which is...

Try rebootiing the mesh; that may then choose a different set of channels. To do so in the App: Click on the "Internet" symbol => Select the "Main Deco" device => click on the "3 dots" in the upper...

Try rebootiing the mesh. To do so in the App: Click on the "Internet" symbol => Select the "Main Deco" device => click on the "3 dots" in the upper right, then, finally, select "Reboot".

Your second drawing is exactly how I run my Deco's in AP mode ... with the caveat to remember that the 'modem' is actually often a modem (Internet gateway), a firewall, and a DHCP router. If you have...

I have not had an issue with multiple Deco's in AP (Access Point) mode. I will relay this 'story', though, about how I ended up having to "work-through" adding a new Deco to the existing AP network....

@Chriskoh Since it doesn't appear that you are using this as a router device, you should change the "Operating Mode" to AP (Access Point). On the default screen (Overview), tap the "More" at lower...